Reviews Cheap 3d Printer Filament

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), U....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Marble PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Marble PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Marble - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

Amazon Basics PETG 3D Printer Filament, 2.85mm, White, 1 kg Spool

  • 3D printer filament (2.85mm diameter, white.
  • designed to fit most common 3D printers (check spool size for compatibility).
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS).
  • offers easy bed adhesion, stiffness, and a glossy-type finish.
  • resealable storage bag included to protect filament between use.
  • keep filament dry and away from UV light.
  • Backed by an AmazonBasics 1-year limited warranty.
  • Please make sure your printer supports 2.85mm filament before buying this filament. This filament is supported on all 2.85mm open standard 3D printers. Verify your printer before purchasing to avoid unnecessary returns..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Light Brown PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Light Brown PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Light Brown - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the bes....
Check Stock

SUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75

  • ① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
  • ④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
  • ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
  • ⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..
Check Stock

Voxelab 3D Printer Filament, 1.75mm PLA Pro (PLA+) Filament, Dimensional Accuracy +/- 0.02 mm, 3D Printing Material 1kg/ Spool, Compatible with FDM 3D Printer/Pen (Natural)

  • 【Premium PLA Filaments】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish..
  • 【1KG (2.2LBS) SPOOL 】Spool size: Φ200mm/7.87" flange, Φ53mm/2.09" hub hole, 65mm/2.56" width. Filament dimensional accuracy 1.75 +/- 0.02mm. PLA filament has minimal shrinkage and warping..
  • 【Vacuum Packaging】Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Technical Specifications】Recommended Extrusion/ Nozzle Temperature 190°C - 220°C, net weight 1kg spool, hot bed 25°C - 60°C..
  • 【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers. Voxelab 3d filament 1.75mm is the most common and easiest to print with since it is cheap and does not have warping issues and has good adhesion to the bed..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry....
Check Stock