Reviews Channel Car Amps

Atlas Shrugged Part III

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos..
  • CONTROLLER: Includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash..
Check Stock

Try Not to Drown feat Duncan Mackay

  • UNCOMPROMISED PHONO AMPLIFICATION AND EQUALIZATION - Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy....
  • SOPHISTICATED CIRCUIT DESIGN ENGINEERED WITH PREMIUM COMPONENTS - High accuracy components, low noise power supply, and low impedance output stage....
  • VIVID STEREO SOUNDSTAGE - Utilizing individual left and right channel OP amps provide optimal channel separation and virtually no crosstalk during....
  • LOW FREQUENCY RUMBLE FILTERING - This selectable high pass filter rolls off the low end frequencies below 20Hz. This slow gentle roll off is helpful....
  • PROTECTED FROM ANY ELECTRONIC INTERFERENCE - Internal metal shielding enclosure to block electro-magnetic interference and electronic noise.
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

Taramps 4 Channel Car Amplifier – Class D Multichannel Amplifier 1200 Watt RMS Car Electronics Car Audio Subwoofer 2 Ohm Stable Bass Boost Crossover for Car Speakers Sub Amp

  • Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 @2 Ohms, 192x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass & Lowpass crossovers..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 9Hz-27KHZ, Bass Boost, SNR>88DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and 2 Ohm Stable.
  • Includes - (1) Taramps 1200W RMS 4 Channel Class D Amplifier.
Check Stock

Lanzar Amplifier Car Audio, 2 Channel, 1,000 Watt, 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG237) , BLACK

  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators.
  • and thermal, overload, and speaker-short protection..
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio..
Check Stock

Neewer 1-Button Footswitch with 1/4” Mono Male to Male Cable, Ideal for Guitar Bass Amplifiers

  • 【1-Button Footswitch】 Connect the single-button footswitch to a standard mono 1/4” input using the 1/4” mono male to male cable. Perfect for novice and professional musicians.
  • 【Channel Switching】 A handy channel switcher for guitar, bass. Compatible with a wide range of guitar amps with on/off switching capability.
  • 【Control the Circuit】 The push-button switch and the included 1/4” mono to 1/4” mono cable make it easy to connect or break the circuit remotely. Also works with any standard audio cables with 1/4” mono plugs.
  • 【Metal Button】 The button is made of metal to provide durability.
  • 【Notes】 This footswitch can be used with guitar amplifiers that feature footswitch connection (a 1/4” jack). It controls only a single channel (not dual channels). The guitar and the stool shown in the pictures are not included.
Check Stock

Lanzar Amplifier Car Audio, 3,000 Watt, 5 Channel, 2 Ohm, Bridgeable 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Wireless Bluetooth (HTG558BT)

  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators.
  • and thermal, overload, and speaker-short protection..
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart..
Check Stock

Memphis Audio MJME8S1 8' MOJO Car Subwoofer+Ported Sub Enclosure+Mono Amp+Wires

  • ...ckvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), 1 Ohm: 1000 Watts x 1 Channel .
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc), 1 Ohm: 2000 Watts x 1 Channel, 2 Ohm: 1500 Watts x 1 Channel, 4 Ohm: 1100 Watts x 1 Channel, Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song, 1 Ohm: 4000 Watts x 1 Channel, 2 Ohm: 3000 Watts x 1 Channel, 4 Ohm: 2200 Watts x 1 Channel. High-Speed MOSFET Power Supply, Optical Coupler Class “D” Technology.
  • Features of RWK41: 1 – 17′ High Grade Twisted Pair of 100% Copper RCA Cable, 17′ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17′ – 18 Gauge Blue Remote Cable, 17′ – 16 Gauge Clear Speaker Wire, 3′ – 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7′ Split Tube Loom, Accessorie....
Check Stock

CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack with American DJ Accu-cable 3-pin DMX Cable (50') Bundle

  • 4-channel dimmer/switch pack with up to 5 amps per channel (15A max).
  • Auto on/off when DMX is detected or removed.
  • Provides DMX control for on/off or dimming to non-DMX fixtures.
  • Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures.
  • Custom looks at your fingertips with 16 built-in, configurable chases.
Check Stock