Reviews Ceramic Abrasive Flap Wheel Kits

Yutnqin 69Pcs Abrasive Wheel Buffing Polishing Wheel Wire Brushes Set for Rotary Tool Accessories,Shank 3mm Mini Brush Polishing Kit,for Power-Operated Grinders

  • Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on ceramic,wood, hardened steel, cast iron, stainless steel and so on.High efficiency, low cost,good wear resistance, durable and practical..
  • These polisher abrasive buffing wheel are used for Dremel DIY.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Package include:40pcs scouring pad mini-brushes,24pcs stainless steel wire brushes,5pcs flap wheels,Total 69pcs..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:Shaft is 3mm (approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Dremel Rotary Tools, Polishers, Hand Drill etc..
Check Stock

3M 3M-18734 Roloc Bristle Disc Grade - 50, Size - 3 - Green

  • ▲[Package includes] Our rotary tools accessories - jewelry tools polishing brushes have 6 different grit with 6 various colour and every grit has 10 pieces for different needs. Green-80 grit, Blue-120 grit, Red-220 grit, Gray Blue-400 grit, Purple-600 grit, Light Green-1000 grit.There are six mandrel(3Pcs 1/8"mandrel+3Pcs 3/32" mandrel).
  • ▲[Feature] Rotary brush is a new type of abrasive that is superior to sandpaper, flap wheels, or other types of sanders, brushes, or abrasive wheels. Molded, abrasive-filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively, with less pressure than wire brushes..
  • ▲[Application] The detail polishing discs mainly suit for deburring, cleaning, finishing, machining and polishing detailed parts, tiny areas and irregular places, like Fruit pit carving,woodcarving.
  • ▲[Multifunction] The radial bristle brush fits also for metal polishing, paint prep, coating & corrosion removal.
  • ▲[Compatibility] The fine polishing wheel brush can be used with most multi-function tools, such as for Dremel drill, die grinders and rotary tools, Recommended for between 15,000-30,000rpm..
Check Stock

3M Green Corps Cut-Off Wheel 20275, Ceramic, 13300 rpm, 4-1/2" Diameter x 3/64" Width, 7/8" Arbor, Green (Pack of 50)

  • Ceramic abrasive grain cuts faster and lasts longer than non-ceramic grain, offering significant productivity gains.
  • Performance far surpasses that of aluminum oxide wheels.
  • Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys.
  • Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.
  • MUST BE USED WITH ANSI-APPROVED FLANGES FOR TYPE 1 CUT-OFF WHEELS AND A WHEEL GUARD THAT FITS THE SIZE OF THE CUT-OFF WHEEL.
Check Stock

M-jump 12 Pcs 1-1/2\ x 1\ x 1/4\ Flap Wheels Set –3 pcs of Each 40 60 80 and 120 Grits Aluminum Oxide for Remove Rust and Weld Burr – 1/4 Shank Fits All Drills

  • Provide fast cutting action at a value price. Ideal for low to medium production environments.
  • The 1/4 inch stem allows for easy mounting on a die grinder or right angle die grinder.
  • A solid hub construction increases balance and reduced vibration in applications such as tube ID cleaning, thread cleaning and deburring.
  • Flap wheel can be dressed to conform to an application part.
  • Specifications: 3/4" X 3/4" X 80AO Wolverine Coated Abrasive Flap Wheel, 1/4" Stem.
Check Stock

9-Pk 3M Scotch-Brite 65084 Roloc Deburr and Finish Pro Unitized Wheel TR 3 Inch X 1/8 Inch X Nh 6C MED+ // 7100081366

  • Unitized construction enhances abrasive durability and strength, helping prolong service life.
  • Non-woven construction permits dust and debris to escape, minimizing loading.
  • Roloc attachment for swift, easy connection to power tool.
  • Multi-purpose wheel presents economical alternative to cartridge rolls, flap wheels, flap discs and coated discs.
Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

EZARC Flap Discs 80 Grit, 4 1/2 x 7/8-Inch Flap Sanding Disc, Type 29 Zirconia Grinding Wheel for Stainless Steel, Sheet Metal (10 Pack)

  • 【Great Performance】EZARC flap sanding discs are made of hard zirconia material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel..
  • 【 Widely Used】80 grit flap disc is smoother than 40 grit, suitable for light stock remove and other grinding work. Our flap disc is widely used for metal or wood, to remove the weld reinforcement, deburring, polishing, and to rust removal..
  • 【 Fast & Efficient Grinding 】Glass fiber and adhesive form a firm combination, will not pollute the working surface. The fiberglass pad can effectively absorb vibration and bring more stable and efficient grinding..
  • 【 Convenient to Use 】Bevel Type 29 angle design makes the edge and corner grinding much more convenient, great for surface sanding, and working on welded seams at a working angle of 5 to 15°..
  • 【 Professional Grinder Flap Disc 】 4-1/2-inch diameter with a 7/8-inch arbor size compatible with an angle grinder with a maximum 13, 300 RPM grinding speed. This angle grinder flap disc is designed for grinding, blending, sanding, and finishing on a wide range of material..
Check Stock

BHA Interleaf Flap Wheel Abrasive Drum, 4\ x 4\ with 3/4\ Quad Keyway (80 Grit)

  • SPECIFICATIONS - These Aluminum Oxide Shank Mounted Abrasive flap wheels come in a pack of 10. Grit 60, 2-inch in diameter, 1-inch thickness with ¼ inch shank..
  • APPLICATIONS - Designed for use on flat, irregular, and contoured surfaces, as well as hard-to-reach places such as pipes and tubing, Eco Edge's flap wheels are suitable for a variety of applications, including de-burring, finishing, polishing and cleaning on metals. It can be used to remove rust and weld burr, as well as paint removal on wood..
  • DESIGN - Aluminum Oxide Shank Mounted Abrasive Wheels are 003cb003eEngineered & Designed in USA003c/b003e by Eco Edge and Assembled in China. Abrasive Cloth has been handcrafted, for perfection and quality assurance..
  • SHANK - Sturdy Solid Stainless Steel Shank fits all power drills and power tool..
  • SAFETY - Max speed for 1" flap wheels: 30,000RPM |1.5" flap wheels: 25,000RPM | 2" flap wheels:25,000 RPM |3" flap wheels: 20,000RPM. Never exceed maximum recommended RPM speed. Always take safety precautions including, but not limited to, gloves, guards, and facial protection..
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock