Reviews Carbon Weld Steel Pipe

SÜA - RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36' x 1/16' (2 Lb)

SÜA RG45, (RG-45), is a copper-coated, low-carbon steel, oxyfuel gas welding rod used for welding ordinary low carbon steel..
RG45 weld deposits are ductile and porosity-free. Commonly used on steel sheets, plates, pipes, castings, and architectural projects.
Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 - No flux required.
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available Diameters: 1/16", 3/32", 1/8" and 5/32" - Available Packages: 1 Lb, 2 Lb, 5 Lb and 10 Lb. Select your choice from the size menu options..

Made of stainless steel, is not easy to bend, accuracy of reading.
Measurements read in standard on one side, and metric on the opposite side.
The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings.
Welding Gage is designed for internal alignment and determining root weld spacing.
The gauge measures internal mismatch of pipe wall, scribe lines, weld fillet and crown height.

THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....

【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.

Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....

1.Material: SUS 304 Stainless steel and high quality carbon fiber, corrosion resistance, rustproof, light weight and durable..
2.Dimension: Inlet:63mm(2.5") ,Outlet:89mm(3.5") ,Total Length:250mm (9.8").
3.Design: Dual-outlet Y-style, equal length type, Angle cut, Clamps on.
4.Installation: Easy clamps on installation. No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
5.Application: Fits for 2.4" outlet universal car original exhaust tail pipe..

【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....

2.25" Inlet 5.50 X 3.00" High 7.00" Double Wall Rolled Oval Resonated Stainless Steel.
Fits a 2.25 Exhaust Pipe 5.50 X 2.25 Inch Outlet.
Polished Stainless Steel (Please measure to make sure it fits your Car or Truck) Fits a 2.25 Exhaust Pipe.