Reviews Carbon Steels

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISE1/4\2T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price..
  • DEDICATED SUPPORT - Contact seller via Amazon anytime for cutting condition data to get the best performance from your Speed Tiger cutters.
Check Stock

HORL 2 Walnut Rolling Knife Sharpener Engineered in Germany for Straight Edge with Industry Diamonds for Steel of any hardness and Magnetic Angle Technology with 15 & 20 Degrees

  • The HORL2 sharpener has the flexibility to satisfy individual requirements in knife sharpening with interchangeable grinding discs and a Magnetic Angle Support with a 15° angle for a fine edge and a 20° angle for a robust blade..
  • The HORL2 sharpening system combines diamond and ceramic discs to sharpen knives of any hardness, including European kitchen knives, hard or soft steel, stainless and rust-resistant steels, and outdoor knives. The industrial diamonds used are the most durable and efficient abrasives..
  • Achieve a sharp, long-lasting edge on your knives with the 20° grinding angle, perfect for robust cutting tasks in the kitchen and beyond..
  • Create a finely honed, razor-sharp edge on your knives with the extra fine 15° grinding angle, ideal for fine cutting work such as sushi, sashimi, Damascus knives, and particularly hard steels with a high carbon content..
Check Stock

Whole Earth Supply Large Drop Point D-2 D2 Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 8 inches Approximate Overall Length, 3.4 inches Approximate Blade Length, 3.65 inches Approximate Handle Length, 1.2 inches Widest Part of Blank, 1.35 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fixed to the blank with brass pins..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Whole Earth Supply Upswept Skinner D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 9.75 inches Approximate Overall Length, 4.7 inches Approximate Blade Length, 4.0 inches Approximate Handle Length, 1.375 inches Widest Part of Blank, 1.125 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fixed to the blank with brass pins..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Hypertherm 420240 Electrode, XPR 80 Amps Mild Steel

  • 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose.
  • General purpose maintenance and repair electrode for welding low carbon steels in any position.
Check Stock

Whole Earth Supply Clip Point D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 8.125 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 2.75 inches Approximate Handle Length, 1.13 inches Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Norton Dressing Tool Stick, Grinding Wheel Tool for maximizing Grinding Wheel Performance, Pack of 5

  • Take care of your grinding wheel with this Grinding Wheel Dressing Tool from Norton Abrasives, perfect for cleaning, opening and reshaping grinding wheels.
  • Engineered with a white aluminum oxide abrasive and a highly versatile vitrified bond, Norton dressing sticks deliver cool, efficient results when used in toolroom and dressing applications.
  • Pair this dressing tool with your manual sharpeners to true and dress a variety of materials, including soft-carbon steels, tool steels and alloys.
  • Regular use will help maximize your grinding wheels' performance.
  • Dimensions: 4 x 3/4 x 3/4 Inches, Pack of 5 Dressing Sticks.
Check Stock

Ultra Sharp XL Double-Sided Diamond Sharpening Stone | Coarse 400 and Extra Fine 1000 Grit Diamond Sharpener | 8 x 2.5 in.| Durable Non-Slip Base

  • High Quality Monocrystalline Diamonds - Diamonds are electroplated onto a solid steel plate. This process ensures the stones stay flat and never need to be lapped like other stones. No adhesives or plastic parts are used resulting in greater durability..
  • Sharpens Faster - The 400# grit side removes metal very quickly while the 1000# grit produces a razor sharp edge. The large 8" x 2.5" size sharpens even the biggest chef’s knife with ease. The user only needs to apply light pressure and let the diamonds do the work..
  • Sharpens Any Steel – Sharpens high carbon steels, hardened stainless steel, all tool steels, and even the new super steels. It also sharpens ceramic kitchen knives with no problem..
  • Unique Diamond Pattern - Eliminates the tendency to clog and keeps the sharpening surface clean and clear of metal shavings..
  • Adjustable Stone Holder - Keeps the stone firmly in place while sharpening and provides the knuckle clearance needed to hold a consistent angle..
Check Stock

Whole Earth Supply Drop Point D2 D-2 Steel Partial/Hidden Tang Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 6.6 inches Approximate Overall Length, 3.5 inches Approximate Blade Length, 2.2 inches Approximate Handle Length, 1.3 inches Widest Part of Blank, 0.5 inches Widest Part of Handle (hidden tang style), 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock