Reviews Carbon Steel Tubes For

Lenox QXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 120" Length, 1" Width, 0.035" Thick, 5-8 TPI

  • QXP vari-tooth design with high positive rake and deep gullets for high-production cutting.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in solid shapes, cylindrical tubes, and sheets.
  • Vari-raker set for multipurpose cutting applications.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

The Worm On The Hook

  • Significantly increase you chances of landing the catch.
  • Most popular and versatile Gamakatsu hook.
  • Used for everything from finesse baits to tubes and jerk baits.
  • High carbon steel construction for strength and durability.
  • Conically needle honed point is sharp right out of the package and stays sharp.
Check Stock

ARRIS 500mm 6mm x 8mm x 500mm Carbon Fiber Tubes Glossy Surface 3K Roll Wrapped 100% Pure for Quadcopter Multicopter (2PCS)

  • NOTE: All the carbon fiber tubes will have a deviation of +/- 0.15..
  • 3K Pure Carbon Fiber, use for RC Quadcopter, Multicopter, Helicopter and Airplanes..
  • Package Includes: 2pcs 6mmx8mmx500mm carbon fiber tubes (Glossy Surface).
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 86690LPB72360 LXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 4-6 TPI

  • LXP vari-tooth design with a high positive rake angle and deep gullets for increased material penetration and chip-carrying capacity compared to standard tooth.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in sheets, solid shapes, and cylindrical tubes.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock

WONDERSUNM Professional Tubing Notcher Tube& Pipe Notcher Adjustable up to 50degrees 3/4” – 3” Tubing Capacity 45 Carbon Steel Structure

  • Accurate notches tubes and pipe from 0-50 degree with the additional ability to offset the notch +/- 1” from the center line. (the cutter centerline is height adjustable to accommodate a wide variety of workpieces).
  • 45 carbon steel construction with needle roller bearing to ensure smooth operation..
  • Clamp in a vice or bolt to a table and use with any hand held drill..
  • Notch pipes an tubes with a OD from 3/4” to 3”.
  • Accepts hole saw thread sizes:1/2” x20TPI, 5/8”x18TPI (hole saw not included).
Check Stock

3M Silver Cut-Off Wheel 87461 T1 4 in x .035 in x 3/8 in Pack of 25

  • GREAT PERFORMANCE AND VALUE – Designed for high-performance metal cutting while helping reduce your abrasive spend.
  • DELIVERS A FAST, CONSISTENT CUT – Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity.
  • LONG LASTING – Exceptional durability for extended wheel life.
  • CUTS A VARIETY OF METALS – Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more.
  • USED IN MANY INDUSTRIES – Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication.
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock