Reviews Carbide Wear Parts

Composite Carbide Sandblaster Nozzle Tip: 3/32' ID, Longer-Lasting than Tungsten & Boron Blasting Nozzles

  • SUPER COMPOSITE CARBIDE: Experience one of the longest lasting materials used in a sandblaster nozzle at a fraction of the price. The composite carbide lasts much longer than Ceramic, Tungsten Carbide & even Boron Carbide..
  • LONG-LASTING NOZZLES SAVE $: Composite carbide sandblaster nozzles are known to outlast all other types. These are estimated to last up to 1000x ceramic, 50x times tungsten carbide, 5x times boron carbide..
  • 3/32" ID BORE DIAMETER: Our medium size is most common, especially for blasting both fine & course abrasive grits inside a cabinet. Shape: standard tapered nozzle tip which is great for for most pressure pot sandblaster nozzle holders..
  • PREMIUM SANDBLASTER NOZZLE: Made of a hard, compacted, specially formulated carbides weighting about 30 grams! Holds up to aggressive abrasive like aluminum oxide and silicon carbide. Has an estimated service life of up to 1,000+ hours with aluminum oxide abrasive!.
  • WEAR RESISTANCE CARBIDE: Get better performance with low-wear nozzles and save money in the long run! 100% SATISFACTION GUARANTEE or your money back. Please contact us if you feel it didn't last..
Check Stock

Mechanical Seal, 304 Stainless Steel + Silicon Carbide Cr Shaft Size 16Mm Cartridge Seal for Grundfos Pump and Water Pump for Cr Series Pumps

  • 【Design to Reduce Wear】304 stainless steel + silicon carbide Material Pump Seals, All axial movement has been eliminated, preventing wear on the shaft and rubber parts..
  • 【Balanced Type】The cartridge seal is a balanced type seal, which makes it less insensitive to pressure..
  • 【Easy to Use】Used for balance sealing. Easy to install, easy to replace without disassembling the pump parts..
  • 【Unique Advantage】Cartridge design provides unparalleled advantages. All of this ensures extra reliability..
  • 【Applicable Model】Combines the best features of standard seals and is cleverly packaged. Suitable for CR series pumps..
Check Stock

Woodys 16-72472 4 Carbide Yamaha

  • 60deg. edge angle for performance cornering.
  • 1 1/2in. carbide wear pads help extend runner life.
  • Full-length hardweld surfaces between all three carbide inserts for total wear protection.
  • Extra-long studs make it easy to mount plastic ski skins.
Check Stock

1 Blade 8 -72t -- RENEGADE BLADE Yellow Talon / Hybrid Polymer Non Stick Coated -- Wood Limbs and Hard Brush Specialty -- Carbide Brush Cutter Weed Eater Blades 203mm Dia.

  • Pack of {1} -- 8"-72 teeth yellow TALON / HYBRID -- Thickest Limbs & Hard Bushes Hybrid Specialty - Carbide Tipped Trimmer Brush cutter Blades, by....
  • BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these....
  • CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is....
  • SIX BLADE TYPES -- All 6 specialty types of blades we offer are as follows: (1) RSB. thick tree limbs thick brush: 8-80t, 9-100t, 10-120t... (2)....
  • RENEGADE BLADE is the ONLY Carbide Brush Blade BRAND on Amazon that has a {REPORT} from the foremost Testing Laboratory: UL, LLC..
Check Stock

Renegade Blade 1 Blade 8 -44t Green Viper/Hybrid - Brush & Brambles Specialty - GS1 Barcode Shelf Hanging Blister Pack - Carbide Brush Cutter Weed Eater Blades 203mm Diameter

  • Pack of {1} -- 8"-44 teeth (green) VIPER -- Brush & Brambles Hybrid Specialty - Carbide Tipped Trimmer Brush cutter Blades, by RENEGADE BLADE, 203mm....
  • BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these....
  • CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is....
  • SIX BLADE TYPES -- All 6 specialty types of blades we offer are as follows: (1) Silver RSB. thick tree limbs thick brush: 8-80t, 9-100t, 10-120t.......
  • RENEGADE BLADE is the ONLY Carbide Brush Blade BRAND on Amazon that has a {REPORT} from the foremost Testing Laboratory: UL, LLC..
Check Stock

2pk--8'--44t/56t Combo Pack -- (1) 44t Green Viper (1) 56t red Razor -- 'Hybrid' Pack -- RENEGADE BLADE® - GS1 Barcoded Shelf Hanging Blister Pack-- Carbide Brush Cutter Blades, 203mm Dia.

  • 2pk--8"--20t/44t COMBO PACK -- (1) 44 teeth green VIPER & (1) 56 teeth red RAZOR -- "HYBRID" Pack -- RENEGADE BLADE - GS1 Barcoded Shelf Hanging Blister Pack-- Carbide Brush Cutter Blades, 203mm dia..
  • BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these parts). IMPORTANT>> A blade does {NOT} fit directly on the tiny 5/16" axle that the "String Spool" screws onto, ALL string trimmers require some type of blade mounting parts (normally 2 small discs, nut, and cotter pin) to run a blade (YouTube can show this). We offer TWO arbor sizes: 25.4mm (same as 1") & also 20.0mm with reducer washer..
  • CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none..
  • SIX BLADE TYPES -- All 6 specialty types of blades we offer are as follows: (1) RSB. thick tree limbs thick brush: 8-80t, 9-100t, 10-120t... (2) Yellow TALON Hybrid, thick tree limbs & hard brush: 8-72t, 9-84t, 10-96t... (3) Red RAZOR Hybrid, medium limbs & thick bushes: 8-56t, 9-68t, 10-80t... (4) Green VIPER Hybrid, small limbs - brush & brambles: 8-44t, 9-48t, 10-52t... (5) RSB, brush & brambles: 8-32t,....
Check Stock

GBJ 20pcs TCMT21.51 Turning Inserts TCMT110204 TCMT21.51 Carbide Inserts TCMT Insert S08K/S10K/S12M-STFCR11 1/3\ 3/8\ 1/2\ 91° Turning Holder Boring Bars (20 pcs TCMT21.51 Inserts)

  • ☞ Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
  • ☞ Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • ☞ Application: Used for turning and finishing on stainless iron parts. Suitable for For S08K/S10K-STFCR11 Lather Turning Tool Holder.
  • ☞ Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • ☞ Package includes: 10pcs TCMT 21.51 Gold carbide inserts.
Check Stock

2pk--8'--20t/56t Combo Pack -- (1) 20 Teeth Blue Hawk (1) 56 Teeth red Razor -- 'Hybrid' Pack -- RENEGADE BLADE® - GS1 Barcoded Shelf Hanging Blister Pack-- Carbide Brush Cutter Blades, 203mm Dia.

  • 2pk--8"--20t/56t COMBO PACK -- (1) 20 teeth blue HAWK & (1) 56 teeth RAZOR -- "HYBRID" Pack -- RENEGADE BLADE - GS1 Barcoded Shelf Hanging Blister Pack-- Carbide Brush Cutter Blades, 203mm dia..
  • BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these parts). IMPORTANT>> A blade does {NOT} fit directly on the tiny 5/16" axle that the "String Spool" screws onto, ALL string trimmers require some type of blade mounting parts (normally 2 small discs, nut, and cotter pin) to run a blade (YouTube can show this). We offer TWO arbor sizes: 25.4mm (same as 1") & also 20.0mm with reducer washer..
  • CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none..
  • SIX BLADE TYPES -- All 6 specialty types of blades we offer are as follows: (1) RSB. thick tree limbs thick brush: 8-80t, 9-100t, 10-120t... (2) Yellow TALON Hybrid, thick tree limbs & hard brush: 8-72t, 9-84t, 10-96t... (3) Red RAZOR Hybrid, medium limbs & thick bushes: 8-56t, 9-68t, 10-80t... (4) Green VIPER Hybrid, small limbs - brush & brambles: 8-44t, 9-48t, 10-52t... (5) RSB, brush & brambles: 8-32t, 9-36t....
Check Stock

2pk 8'-72t -- RENEGADE BLADE® Yellow Talon / Hybrid (Polymer Non Stick Coated)-- Wood Limbs and Hard Brush Specialty -- Carbide Brush Cutter Weed Eater Blades, 203mm Diameter

  • Pack of {2} -- 8"-72 teeth yellow TALON / HYBRID -- Thickest Limbs & Hard Bushes Hybrid Specialty - Carbide Tipped Trimmer Brush cutter Blades, by RENEGADE BLADE. Our most advanced -state-of-the-art blade-, [baked-on] POLYMER NON STICK coating (the 1st to offer this on a brush blade) with the longest 7mm low friction KERF - YG8 (highest cobalt %) quality teeth & with low-friction rounded teeth backs..
  • BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these parts). IMPORTANT>> A blade does {NOT} fit directly on the tiny 5/16" axle that the "String Spool" screws onto, ALL string trimmers require some type of blade mounting parts (normally 2 small discs, nut, and cotter pin) to run a blade (YouTube can show this). We offer TWO arbor sizes: 25.4mm (same as 1") & also 20.0mm with reducer washer..
  • CARBIDE -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none. We use the most expensive highest "COBALT" content highest grade YG8 teeth available.
  • SIX BLADE TYPES -- All 6 specialty types of blades we offer are as follows: (1) RSB. thick tree limbs thick brush: 8-80t....
Check Stock