Reviews Carbide Tipped Milling Cutter

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..

Check Stock

SILIVN 5pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 5 pcs Screws

【Exterme Hard Material】：Made of solid tungsten steel,providing you a better experience and durable use..
【Most Practical】：Easy to replace your jointers and planers. Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
【 Perfect for Professional Carpenters and Beginners】：This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws ).....

Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....

Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..

Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

[Specification]: Shank diameter 6mm/0.23".
[Single Flute End Mills]: 5 Pcs end mill bits.
[ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
[Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
[Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.

Check Stock

Milling Cutter, Lightweight and Strong Metal Milling Cutter Not Easy To Break Durable Higher Accuracy for Outdoor

This metal mill set promises perfect milling performance and higher working efficiency..
5‑piece end mill cutter set brings more convenience to the changing and renewal of cutters..
Through mirror polishing process, the milling cutters have a high chip removal efficiency..
Single blade, acute angle and incisive edge provide the quick milling with extra accuracy..
Made of tungsten carbide, all the cutters are not easy to break in continuous processing..

Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

[Specification]: Shank diameter 3.175mm 1/8”.
[Single Flute End Mills]: 10 Pcs end mill bits.
[ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
Offer a smooth cutting surface and chip clearing.
[Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
[Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.

Check Stock

Concave Cutters - Shank Type 3/16\ Radius x 3/4\ Sk. Dia. x 3-1/2\ OAL x 1\ Dia

Exquisite all‑grinding and durable, making a strong guarantee for the service life of the milling cutter..
Adopts micro-grain tungsten steel base material, which has higher wear resistance and strength, and belongs to the exclusive cutter for high-strength high-speed cutting applications..
The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance..
With a blade length of 10mm, a shank diameter of 4mm and a total length of 50mm, it can be perfect replacement for the old one..
Convenient to use and with good performance, with small size, easy to carry and store..

Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..

Check Stock