Reviews Carbide Saw

IRWIN Tools MARATHON Carbide Cordless Circular Saw Blade, 6 1/2-Inch, 24T, .063-inch Kerf (24029CL)

  • Circular saw blades have an ultra-thin kerf for more cuts per charge.
  • Each circular saw blade has face-ground, carbide-tipped teeth that produce fast, clean cuts.
  • Aggressive, 22° hook angle for swift cuts.
  • Construction-grade teeth provide longer life.
  • Circular saw blades are designed for framing and ripping.
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Official Rotorazer Platinum Replacement Blades Set of 3 for Platinum Rotorazer AS SEEN ON TV

  • Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
  • 7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
  • 1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
  • Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
  • EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..
Check Stock

Turbo Flex 360 Instant Hands Free Faucet Swivel Spray Sink Hose - As Seen on TV

  • Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
  • 7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
  • 1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
  • Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
  • EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Diablo D1024X 10-Inch 24-Tooth ATB Ripping Saw Blades Bundle (2-Pack)

  • ...e cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades.
  • Ideal Usage: For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding.
  • Fits Table Saws: The Diablo D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.
  • Features Shock-Resistant Carbide: The Blade features shock-resistant carbide for long-lasting precision, so you can count on it over the long term, as it is designed for durability. The blade's hardy....
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock