Reviews Carbide Lathe Tools

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

  • 【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
  • 【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
  • 【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
  • 【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..
Check Stock

PROXXON MICRO Mill MF 70, 37110

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

On the Turning Away

  • Six Carbide Tipped, USA Made Wood Turning Tools, PLUS a well balanced, Foam Grip, 17" Long Interchangeable Lathe Tool Handle.
  • Includes our Simple Swan Neck Hollower, Specifically designed to reach areas inside hollow form vessels inaccessible with straight shaft tools..
  • Tools measure 12" length with 2.5" handle tang. T15 & T20 Torx star tip wrenches are included..
  • American made in Ramsey, Minnesota by Harrison Specialties, a family owned and operated CNC Machine shop.
  • Tools are easily changed by loosening the allan set screws in the handle..
Check Stock

PSI Woodworking LCHOL3C Wood Lathe Carbide Tip Mini Hollowing Tool 3pc Chisel Set

  • Create small bowls and hollow vessels on your woodturning lathe with this carbide tipped hollowing tool chisel system.
  • Includes (3) tools with 6mm carbide cutters: Straight, Medium-angle Swan Neck, Steep-angle Swan Neck.
  • Overall length of each tool is 15" with 10" handle and 5" blade.
  • Also includes hex wrench, wooden storage case, and instructions.
  • Replaceable 6mm Carbide Cutters (LCHOL3CX) are available.
Check Stock

SENDUO Upgrated Mini Lathe 7\X14\

  • The mini metal lathe features a 550w brushed motor, 110V 60hz. High grade iron construction with robbert feet to be solid and stable turning, drilling, threading and cutting performance. Two rails offer smooth and durable moving..
  • MT4 Spindle speed range 0-2250±10%RPM,have a digital display,which is convenient for customers to operate,the speed levels can be adjusted for different metal workings. The mini lathe machine with a soft start button ,features forward and reverse design..
  • Power metal lathes are with Large Center Distance 13.78"/350mm and Swing Over Bed: 7.09"/180mm. K11-100 3-jaw self-centering chuck with 3 internal jaws and 3 pcs external jaws.Cover and long splashguard offers a clean working and safer condition .the cover have an automatic power-off protection function ..
  • Benchtop Lathe with 4-way tool rest, can help changing and adjusting cutting tools at different directions easily. Loose the fix handle, then you can move the tailstock forth and back.
  • Widely Used-Ideal for sample processing, mini precision parts processing, and modeling works.equiped with Metal gears,Aluminum handwheel,and extra set of the metal gears ,an extra lamp and free 7PCS lathe carbide tool.
Check Stock