Reviews Carbide Cutting Inserts

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

HHIP 2065-2500 2-1/2 Inch x 3/4 Bore 45 Degree SE Indexable Face Mill

  • The close pitch, super positive, 45 degrees major cutting edge angle, milling cutter reduces cutting forces and permits high cutting speeds with limited power machines. Screw M5x12.
  • SEHT-432 (SEHT120408) Tin coated Carbide Insert(Item #6017-0432).
Check Stock

QWORK Lathe Threading Tools, 10PCS 16IR AG60 Carbide Threading Inserts for Threading Turning Holder

  • Model:10 Pcs 11IR A60 1/4 Carbide Inserts Blade,suitable for Lathe Threading Tool.Right-handed external thread inserts.
  • Material: cemented carbide.Size:Length:9mm,Thickness:3mm.
  • The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability,Good for cutting and Metal surface finishing.
  • 10 pieces Lathe Threading Inserts in 1 box, packed in plastic containers(box color in random), safe and easy to store.
  • High efficiency and better wear resistance than the traditional welding blade. 1 year warranty, if there is any problem, please feel free to contact us for replacement or refund..
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

  • ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
  • ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
  • ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
  • ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
  • ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

Upgraded Helical Cutterhead for 13' DeWalt Planer DW735 DW735X Planer

  • ...-The biggest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads..
  • LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving..
  • BRAND QUALITY WARRANTY-Package included 1 x 13” helical cutterhead.
  • 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. The TJATSE Customer Service and Technical Support Teams are all days online for help..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock

GBJ 10pcs APMT1604 PDER ZM Milling Inserts Turning Inserts Cutting Tools ZM1135 for BAP400R Milling Inserts Tool Holders Processing Hard Steel Parts (APMT1604PDER Purple)

  • ☞ Model: APMT1604 PDER , Coating: CVD, Material: Carbide, Heat treatment makes inserts harder..
  • ☞Application: Especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 400R Series End milling holder.
  • ☞Coating: CVD , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞Advantages : The carbide matrix combination with the AlTiN coating of composite multilayer structure greatly prolongs service life of cutting tool , has super strong film-base bonding force and extremely low friction coefficient ..
  • ☞Package includes: 10pcs APMT1604PDER ZM1135 carbide inserts for hard steel parts..
Check Stock

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

  • ♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
  • ♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • ♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
  • ♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock