Reviews Can Ethernet Board

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

Arduino MKR ETH Shield [ASX00006]

  • Expansion shield to bring your Arduino board online with simple-yet-reliable communication libraries, supporting TCP and UDP protocols over an Ethernet cable..
  • Rich collection of examples: browse the Internet, make a tiny web server, and send data to a cloud with little coding effort..
  • Use its micro-SD card slot to store sensor information, serve files to 8 simultaneously connected devices, or log traffic..
  • Stackable : other shields can be stacked on top of it adding new functionalities to your projects..
  • No extra power needed, gets it from your Arduino board. It is true plug and play!.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Iwillink Cat6 Ethernet Surface Mount Box, 2-Port RJ45 Surface Mount Box, 5-Pack, White

  • Cat6A ethernet connector is designed for fast and easy installation without crimping tools..
  • Fully backwards compatible with Cat 5e or Cat 6.
  • Cat6A Shielded connector supports 23 to 26 AWG solid or stranded Shielded wire with an outside diameter between 6.0 and 7.5mm, support 10Gb Ethernet..
  • Zinc alloy housing provides superior shielding and mitigates alien crosstalk.
  • Rugged metal alternative to RJ45 modular plugs..
  • This product is made of plastic, all-copper gold-plated terminals, PCB board, and double-clamp fixed cable behind, which can be reused..
  • IDC modules can be wired for T568A or T568B wiring..
Check Stock

Ethernet Cable Splitter 1 Male to 2 Female High Speed Adapter, wikero Ethernet RJ45 Network Ethernet Splitter Adapter Cable Suitable Super Cat5, Cat5e, Cat6, Cat7 Connector LAN Internet Cable Adapter

  • This Ethernet Cable Splitter Multi-Function: You can easily convert the RJ45 connection two RJ45 sockets, allowing two computers share high-speed DSL, cable modem and Ethernet ports without the need for a router..
  • The BEST Design: This ethernet female female splitter adapter lan cable solves the problem of avoiding pulling cables back and forth. Compatible with Cat5/Cat5e/Cat6/Cat7..
  • The BEST Material: 2mm Thick PCB board is embedded in the conductive circuit avoid damage the conducr and leakage. Ensure a longer service life..
  • Pure Copper Gold-Plated Needle with Eight Cores: Excellent connection and transmission performance. The fixed RJ45 female interface can shield external electromagnetic signal interference prevent damage the Internet signal. The screw hole panel can be fixed the wall panel..
  • Tips for use: Only one device is supported to connect to the Internet at a time, you cannot use this RJ45 Ethernet splitter adapter to make two devices go online at the same time, one is set to disconnect from the network, and the other will be connected to the Internet..
Check Stock

RJ45 Network Ethernet Splitter Cable,esbeecables Ethernet Splitter 1 Male to 2 Female LAN Ethernet Splitter Adapter Suitable Super Cat5,Cat5e,Cat6,Cat7

  • ETHERNET SPLITTER CONNECTOR USAGE - (1) Use a Single Adapter : It can be Used as Ethernet Cable Extender, But Only Port 1 Available to be Used. (2)....
  • WORKING PRINCIPLE - Internet Splitter Adapter is to Devide One Original Pre-embedded Network Cable (8 Cores) Into Two Groups(1236/4578), Respectively,....
  • STABLE TRANSMISSION - The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, Rj45 Eight-core Standard Jack,....
  • SAFETY AND STABILITY - Environmental Protection and Flame Retardant ABS Plastic Shell, Fixed Rj45 Interface, 8 TVS Gas Discharge Tube Lightning....
  • PRECAUTIONS - Rj45 Splitter Adapter is to Resolve Connection Problem Caused by Insufficient Cords, through the Physical Tap Way Connection to Achieve....
Check Stock

Dell Adaptor USB-C To Ethernet, DBQBCBC064 (PXE Boot)

  • Connectors: USB-C (male) on one end and an Ethernet RJ-45 (female) on the other..
  • Features: built-in driver for easy setup.
  • enables PXE Boot on devices lacking on-board Ethernet (as long as they have USB-C port).
  • allows you to extend your device’s bandwidth by establishing a new Internet connection..
Check Stock

OseTub RJ45 Coupler Ethernet Extender Connector, in-Line Coupler Female to Female Ethernet Cable Adapter for Cat7 Cat6 Cat5 Cat5e Ethernet Cable (6 Pack)

  • Great-Quality RJ45 Coupler: Our RJ45 ethernet extender coupler are made with high-quality materials to ensure reliable and secure connections for your Ethernet network. Ideal for extending ethernet connection by connecting 2 male network cables together..
  • Durable Construction: This Ethernet Extender Coupler has eight pins that are used to transmit data between devices. This ethernet coupler with nickel plated contacts and easy snap-in retaining clip, the RJ45 coupler ensures a secure and no corrosion connection. Designed to be easy to insert and remove, making them a convenient choice for any networking setup..
  • Fast Data Transfer: With support for speeds up to 10 Gbps, our RJ45 ethernet coupler allow for fast data transfer between devices, signals pass through without any loss of signal integrity or lag, suitable for most networking applications..
  • Wide Compatibility: Our RJ45 Coupler are compatible with a variety of networking devices, including switches, routers, and network interface cards (NICs). This female to female ethernet extender adapter is compatible with Cat 7, Cat 6, Cat5e, Cat5 network patch cords, commonly use....
Check Stock

Geekworm Raspberry Pi Zero 2 W Soft Router Dual 100M Ethernet Expansion Board X305 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Pi Zero..
  • 【Dual 100M Ethernet】With dual 10/100M Ethernet ports, ideal for soft router applications, fully compatible with OpenWrt without the need for drivers.
  • 【2-Port USB HUB】On-board two USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X305.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X305 V1.2 Expansion Board.
  • Note: not inlcude Raspberry Pi board & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X305..
Check Stock