Reviews Cable Clamps And Hangers

Dumble Heavy Duty Jumper Cable and Quick Connect Heavy Duty Jumper Cables 1 Gauge Jumper Cables for Cars Trucks 30ft

  • ...Amps peak engine starting current at 12V DC end and 100 Amps at 110V AC service end (175A-600V for disconnect use only – not for interrupting current).
  • FITS YOUR VEHICLE: 1 gauge thick professional grade copper wire to handle more amps and lose less when jumping.
  • 30-foot (9.1m) long cables for car or even tow truck.
  • 4-inch x 5.75-inch (10.2cm x 14.6cm) overall clamp size with 0.25-inch to 1.7-inch (0.6-4.3cm) jaw opening to access tight spots and clamp to top and side post batteries on your vehicle (works for electronic ignitions and other vehicles as long as polarity is correctly observed and battery terminals are accessible).
  • PERMANENT INSTALLATION: Battery booster cable has 4 color-coded clamps to prevent crossing wires – 2 red positive (+) and 2 black negative (-).
  • Connect 5.75-foot (1.8m) long permanent eyelet ring terminal ends to functioning battery and 24.25-foot (7.4m) long alligator clamp ends to battery that needs to be jumped (both are connected to 5.25” x 2.2” x 1” inch (13.3cm x 5.6cm x 2.5cm) quick connect/disconnect coupler.
  • Comes with attached plug cover protective cap for when not plugged in.
Check Stock

DNA MOTORING CBE-HC06EX-BT Catback Exhaust System [for 06-11 Honda Civic EX/LX/DX]

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • 【Flexible hose pliers with long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
  • 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
  • is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
  • 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
  • let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
Check Stock

Orange Cycle Parts Universal Chrome Clutch/Throttle Cable Clamp -1 1/4 in. Alternative to Billet Clamps

  • Universal Chrome Clutch Cable Clamp -1 1/4 in..
  • 1 1/4 in. top-quality clutch cable clamp is made from die-cast aluminum and is a low-cost alternative to billet clamps.
  • Secures the clutch cable out of the way for a clean, polished look.
  • Clamps the clutch cable to handlebars or frame tubes.
  • For 1 1/4 inch bars or frame tubes. Sold each.
Check Stock

20Pcs 1/2 Inch P-Type Cable Clamps, Stainless Steel Rubber Cushion Pipe Clamps Assorted, Tube Holder for Tube, Pipe or Wire Cord Installation

  • MATERIAL: Made from 304 premium stainless steel with rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place.
  • SIZE: Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1/2 inch. Fit for 1/2 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application.
  • EASY TO INSTALL: The P-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install.
  • PACKAGE INCLUDE: Total 20Pcs rubber cushioned clamps are packed in a transparent plastic case, which is sturdy and neat, convenient for storage and access.
  • APPLICATION: Rubber pipe clamps apply to automotive, industrial, boat marine, windshield, household etc. Use for wiring, cables, pipe, rack, line management and restoration. No matter in salt water or air environment.
Check Stock

Kitchen Utensil Hooks,Wall Mounted Utensil Hangers Racks Hooks (6)

  • ...PERFORMANCE - Pack of 2 kitchen rails, with 12 sliding hooks, which will bring you one step closer to a neat and tidy kitchen set-up. Maximize unused wall, door and cabinet space and turn it into an additional storage opportunity. It's really practical for daily use..
  • AVAILABLE PLACES & APPLICABLE RANGE: the utensil hangers are available for many places. They can be used in kitchen for hanging utensil like spoons, spatula, cooking utensils, kitchen gadgets. Also, it is able to be used in bathroom in order to hang up towels, robe, brush. What's more, it can be installed on the door back for keys, caps, umbrellas..
  • WARNING TIPS: the clamps of utensil holders are only suitable for shelves or doors which the thickness ≥0.31''(0.8cm) & ≤ 1.9"(4.8cm). Please confirm the thickness of the shelves or cabinet in advance before purchase..
Check Stock

Solarson 44 Pieces Cable Clamps Assortment Kit, Stainless Steel Rubber Cushion p Clamps Assorted in 5 Size 1/4'' 5/16'' 3/8'' 1/2'' 5/8'', Come with Durable Storage Case with Chart

  • ➣【HIGH QUALITY】- Solarson cable clamps made from 304 Premium Stainless steel material with quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place.
  • ➣【WIDELY USED】- Wire clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment.
  • ➣【SIZE】- Adel clamps screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread. 44pcs Cable Clamp Assortment Kit inside diameter range: 1/4'', 5/16'', 3/8'', 1/2'', 5/8' (6.4mm~16mm). Fit for outside diameter range of 1/4''- 5/8'' wiring, lines,hoses or cables to a panel or frame application..
  • ➣【STYLISH DESIGN】- The P-Style design makes the pipe clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install.
  • ➣【ENVIRONMENTAL FRIENDLY】-- Rubber cushioned insulated clamp can be reused and recycle if you do not want them to stay on the original place thanks to the hig....
Check Stock

2PCS Battery Jumper Cable Clamps, Govel Heavy Duty Pure Copper Alligator Clips Jumper Cables Boost Clamp, Car Battery Charger Clamps, Suitable for Car Auto Vehicle Boat (Red & Black)

  • 【Perfect Tools】 The set of Govel jumper cables replacement battery clamps are ideal for replacing, repairing a damaged pair of connectors on an existing jumper cable, or creating custom-length cables..
  • 【Heavy Duty】 The conductors of the Govel alligator pliers are made of pure copper for good electrical conductivity, the strong jaws teeth of the jumper cables clips will not bend out of shape when squeezed..
  • 【Parameter Reference】 The red Govel alligator is positive and the black one is negative. Car battery clamps support cable gauge from 2 to 6 AWG. Input: 12V-24V.
  • 【Widely Use】 These jumper cable clamps are suitable for various battery chargers projects such as voltage tester, all cars and truck batteries, solar panels, camping, boats, electric fences, etc..
  • 【Attention Points】 Don't forget to slide the rubber handles over the wires before you secure the wire-ends to the clamps. If you have any questions on use, please feel free to contact us..
Check Stock

Over Axle Exhaust Kit Universal 3 Mandrel Bend

  • single 3"/dual 2.5" Flowmaster Super 10 Muffler.
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged.
  • Two 3.5"x18" WELD-ON angle-cut chrome tips.
  • Multi-depth insulated hangers & muffler clamps.
Check Stock