Reviews Cable Clamp Brackets

OTC 4525 Drake Off Road Cable-Type Flexible Hose Clamp Pliers

Drake Off Road Cable-Type Flexible Hose Clamp Pliers Allows technician to access the flat-type hose clamps located in hard-to-access areas.
Drake Off Road Plier has locking mechanism to hold clamp in the open position.
Makes removal and installation of clamp much easier.
Drake Off Road Cable-Type Flexible Hose Clamp Pliers Heavy-duty 24" cable flexes to almost any position.

▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.

【Heavy Duty And Durable】High strength carbon steel line cable, braided, anti twist. Cable length of 39ft, diameter is 1/8″. Rugged steel shell and mounting hanging clamp brackets, with reliable hardware, makes our mini electric wire host strong and durable enough to withstand heavy use..
【Sheaved Pulley Lift Hook For Dual Line Operation】2 heavy duty weighted lift hook, maximum load capacity ups to 220lbs each, 440lbs total. Lift speed of 26ft per minute of single hook, 13ft per minute of double. Max lift height of 39ft of single, 20ft of double hooks..
【High Quality Cooper Motor】ETL Approved grade, features good heat dissipation ability. It provides strong power with relative low electricity consumption..
【Built-in Safety Braking Mechanism】With easy operate remote control panel, fully automatic hoist, requires no hand cranking. Item features automatic brake function with build-in safety braking mechanism and thermal protection device to ensure safety..
【Easy to Operate】It comes with all necessary mountings. Simply assembled then ready to use. Compact construction, lightweight, easy operation, perfect for lifting small engines, transmissions, large shop tools, or building supplies in factories, warehouses and cargo berth..

These brackets allow you to clamp together two surfaces with ease..
No complicated cutting, drilling or installation..
Simple design allows numerous uses. Pull together tabletops and panels for tight seams. Can be used as a temporary clamp for miter joints and....
Made from heavy duty 12-gauge galvanized steel.
Measures 3.5" x 0.75". Hole size is 3/16". Screws not included..

✔ This Roof Bars are Universal. Designed for Cars that Do Not Have Raised Roof Rails Already Fitted..
✔ Lockable Anti-Theft Design - 2 Locks Per Bar (includes keys).
✔ Suitable for 4 or 5 Door Cars Only (not suitable for 3 door cars, vans or large 4x4s)..
✔ Metal Brackets Clamp Under Door Recess - Includes 2 Clamp Types (pictured). Ratchet Tensioners Allow Easy Adjustment..
✔ Always Ensure Bars Are Securely Fitted Before Driving. Light Assembly Required..

UNIVERSAL LAPTOP ARM STAND - Compatible with Laptops, Macbooks, and Chromebooks with up to a 17 inch screen and a weight capacity of 22 lbs. The laptop platform tray has adjustable brackets, anti-slip padding, and a lip to secure the device in place. Additionally integrated ventilation helps with cooling by allowing increased airflow..
FULL MOTION LAPTOP MOUNT - With multiple arm joints this articulating laptop arm allows for easy adjustment of the height and direction of the tray above the desk. Full featured gas spring arm with 360 degree swing, maximum extension length of 19.5 inches, 145 degree tilt range, and max lift of 19.8". PLEASE ADJUST THE GAS SPRING TENSION IF THE HEIGHT ADJUSTMENT IS NOT WORKING..
ERGONOMIC LAPTOP DESK MOUNT - Convert you desk into a sit-stand laptop workstation and improve your efficiency and level of comfort. Set your laptop to the optimal display height and angle which may help reduce eye, neck and back pain. Pair it with one of our monitor desk or wall mounts to further raise your productivity..
SPACE SAVING MODERN DESIGN - An off-desk solution frees up valuable counter space and promotes a clean work environment. The stylish arm has internal cable management pass-through features to organize wires and cables and de-clu....

ORGANIZE: Tidy up cables to keep operations running smoothly. Use these cable tidy management brackets to organize fiber optic cables, network cables, patch cables, power cables and more..
PERSONALIZE: As opposed to a solid cable management bar, the individual cable management brackets allow for flexibility when it comes to choosing where to use them. Freely choose where to place each bracket individually..
SPECS: You will receive a set of brackets each measuring 1-3/4" x 2-3/8" x 1-3/4" (4.4 cm x 6 cm x 4.5 cm). You will also receive a set of screws required for installation..
STURDY: Made using high-quality steel, these organizer brackets are sure to stand the test of time..
NOTES: The wire management brackets must be screwed in place using profile rails. Screws included..

ORGANIZE: Tidy up cables to keep operations running smoothly. Use these cable tidy management brackets to organize fiber optic cables, network cables, patch cables, power cables and more..
PERSONALIZE: As opposed to a solid cable management bar, the individual cable management brackets allow for flexibility when it comes to choosing where to use them. Freely choose where to place each bracket individually..
SPECS: You will receive a set of 5 brackets each measuring 1-3/4" x 2-3/8" x 1-3/4" (4.4 cm x 6 cm x 4.5 cm). You will also receive a set of 10 screws required for installation..
STURDY: Made using high-quality steel, these organizer brackets are sure to stand the test of time..
NOTES: The wire management brackets must be screwed in place using profile rails. Screws included..

【Method of operation】：You slip the cable to be tensioned in from the side, The tool clamps onto the cable and the grip tightened as you pull on the loop end. The grip can slip if the cable is wet or coated with dirt or a lubricant, so it should be clean and operated when dry (not during or after a rain)..
【Function】 - It can adjust the overhead power lines, which can solve the problem of sag and tight it..
【High Quality】 - Made of high quality alloy steel, this clamp is durable, stable, and high strength..
【Keep Safe】 - Due to the anti-chip safety device on the clamp mouth, this clamp can make the safety and no jumper. And the tong is smooth, which can reduce the damage to the lead..
【Usage】 - This clamp fit for Cable from 5/32 - 7/8 Inch. With the 2Ton/4409 Lb of max safe load, it is suitable for all kinds of steel cables and cables.