Reviews Bumper Plate

BEARD MANUAL THE PERFECT STARTERS GUIDE

  • Bumper plates are constructed of high density rubber with solid stainless steel inserts that can withstand repeated drops and with minimal bounce.
  • Each bumper plate has an inner ring with a diamter of 2" and fits any olympic barbell, dumbbell bar or sled with a 2" diameter.
  • Each bumper plate is color coded for easy identification and labeled in both lbs and kgs.
  • IMPORTANT - 10lb plates can bend when dropped ALONE while on a barbell.
Check Stock

West Coast Rogues Gallery Bugsy Siegel [VHS]

  • Bumper plates are constructed of high density rubber with solid stainless steel inserts that can withstand repeated drops and with minimal bounce.
  • Each bumper plate has an inner ring with a diamter of 2" and fits any olympic barbell, dumbbell bar or sled with a 2" diameter.
  • Each bumper plate is color coded for easy identification and labeled in both lbs and kgs.
  • IMPORTANT - 10lb plates can bend when dropped ALONE while on a barbell.
Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for ALFA ROMEO (All Models) QUANTITY DISCOUNT (9.45$ to 5.60$) (each with 6 Unique Screws + Wrench + 2 Built In Nuts) NEW (1)

  • ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license....
Check Stock

2 Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for ALFA ROMEO (All Models) QUANTITY DISCOUNT (9.45$ to 5.60$) (each with 6 Unique Screws + Wrench + 2 Built In Nuts) NEW (2)

  • ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license....
Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Brackets for HYUNDAI (All Models) QUANTITY DISCOUNT (9.45$ to 5.60$) (each with 6 Unique Screws + Wrench + 2 Built In Nuts) NEW (1)

  • ► ???? Compatibility: It’s a design made to fit all HYUNDAI models ( VERACRUZ, XG300, XG350 ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/licen....
Check Stock

Hooke Road 05-07 F250 F350 Front Bumper w/Winch Plate & LED Spotlights for 2005 2006 2007 Ford F-250 & F-350 Truck, Solid Steel Full Width Aftermarket Bumper

  • 【Compatibility】 - Discovery Front Bumper for 2005 2006 2007 Ford F250 F350 Models. Bumper weight: about 94 lbs.
  • 【Full Protection Ram Bumper】 - 3-piece modular design. Rugged styling and excellent protection. Perfectly follows the body lines. Get through the treacherous off-road terrains with help of the Hooke Road Discovery Front Bumper. This awesome component is designed to provide you with excellent front end protection.
  • 【Practical Design】 - Comes with a built-in winch plate that can handle up to 12,000 lbs of winch. Equipped with 2×18w LED spotlights. Pre-cutouts that work with factory tow hooks. Equipped with 2 hooks on bull bar that accommodate a 22-inch light bar (Light bar not included)..
  • 【Heavy-Duty Construction】 - Made of 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) steel for the winch plate and mounting structure plate.
  • 【Durable Coating】 - Textured black powder coat finish & Premium E-coating process inside for long-lasting durability and corrosion resistance.
Check Stock

eAccessoriesUSA Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for Acura (All Models) Quantity (9.45$ to 5.60$)(Each with 6 Unique Screws+Wrench+2 Built in Nuts) (1)

  • ► ???? Compatibility: It’s a design made to fit all ACURA models ( CL, ILX, ILX HYBRID, INTEGRA, LEGEND, MDX, MDX SPORT HYBRID, NSX, RDX, RL, RLX, RLX SPORT HYBRID, RSX, SLX, TL, TLX, TSX, VIGOR, ZDX ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license....
Check Stock

BalanceFrom Everyday Essentials Color Coded Olympic Bumper Plate Weight Plate

  • Bumper plates are constructed of high density rubber with solid stainless steel inserts that can withstand repeated drops and with minimal bounce.
  • Each bumper plate has an inner ring with a diamter of 2" and fits any olympic barbell, dumbbell bar or sled with a 2" diameter.
  • Each bumper plate is color coded for easy identification and labeled in both lbs and kgs.
  • IMPORTANT - 10lb plates can bend when dropped ALONE while on a barbell.
Check Stock

BalanceFrom Everyday Essentials Color Coded Olympic Bumper Plate Weight Plate

  • Bumper plates are constructed of high density rubber with solid stainless steel inserts that can withstand repeated drops and with minimal bounce.
  • Each bumper plate has an inner ring with a diamter of 2″ and fits any olympic barbell, dumbbell bar or sled with a 2″ diameter.
  • Each bumper plate is color coded for easy identification and labeled in both lbs and kgs.
  • IMPORTANT – 10lb plates can bend when dropped ALONE while on a barbell.
Check Stock