Reviews Bumper Moldings

DNA Motoring ZTL-Y-0104 Set of Sunroof Track Repair Kit

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • These are flexible plastic trim pieces that you place onto your roof or roof's existing moldings. Each piece has a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. Each molding is 5/8 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THESE SIZES WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

IPG TM271 American Specialty TrimFast Masking Tape, 50mm x 10m, (24-Pack)

  • For use on corner and straight moldings around windshield and other automotive glass.
  • Stain resistant, temperature resistant, paper masking tape combined with strong PET (polyester) film as insertion lip for painting around window lacings.
  • Lifts moldings away to permit sanding, preparation for easy cornering /curved surfaces.
  • Re-positionable rubber based pressure-sensitive adhesive provides secure hold to and clean removal for bonded / fixed screen rubbers and flush mount / insert moldings around windshield and other automotive glass.
Check Stock

Jackwood 33 Feet Acrylic Double Sided Heavy Duty Mounting Tape (Pack of 3) Weatherproof for Outdoor & Indoor, Holds Heavy Stuff in Cold & Hot Condition, Removable & Residue-Free (Mixed)

  • ... No objectionable odor and nontoxic, environment protection and no discoloration..
  • Multi-use for Indoor & Outdoor: This weather-proof adhesive tape, the adhesion won’t be affected by spray. Double-sided adhesion, suitable for walls, wood, metal, concrete, vinyl, marble, tiles, bricks, plastic, automotive moldings, car registration plates, name plates, address plaques, signs, car holders, tile, big glass, aluminum/plastic installation, refitting vehicle for body kit/front bumper/rear bumper/side skirt, metal mailbox and so on..
  • Note: 1. Please don’t hang stuff after pasting in 24 hours because the bonding surfaces need to be permeated. 2. Please giving strength during installation for a strong holding. 3. The best time for removing is within 72 hours or surfaces will be stuck too tight because the bonding surfaces need to be permeated..
Check Stock

Car Element 1in(25mm) Wide Automotive Chrome Side Body Trim Molding - 15Ft Car/Truck/RV Moulding Trim Strip(Self Adhesive) for Door Window Scratch-Proof ,Silver, FB-25MM

  • ... extreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance..
  • 【FLEXIBLE & UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life..
  • 【WIDE USING】Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights..
  • 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface..
  • 【CONTACT US】Please let us know that if you have any problem with our product, and we will respond within 24 hours.We would like that made customer 100% satisfaction .But y....
Check Stock

1/2in(12mm) Automotive Chrome Trim Molding - 25Foot Side Body Chrome Trim Strip(Self Adhesive) for Car/Truck/RV Door Window Bumper Scratch-Proof

  • ...extreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance ..
  • 【FLEXIBLE & UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life ..
  • 【WIDE USING】Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights ..
  • 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface.（✔Note: There is a BLUE or CLEAR film cover of the product for protective. Please removal this film before using.）.
  • 【CONTACT US】Please let us know that if you have a....
Check Stock

Automotive Authority Black Side Body Trim Molding for 1988-1998 Chevy GMC Tahoe Suburban Silverado Pickup Truck - 2.5\ - C1500, C2500, K1500, K2500, Blazer (Full Roll - 320\)

  • ...xtreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance..
  • 【FLEXIBLE and UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life..
  • 【WIDE USING】 Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights..
  • 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface.（ Note: There is a BLUE or CLEAR film cover of the product for protective. Please removal this film before using.）.
  • 【CONTACT US】 Please let us know that if you have any....
Check Stock

Sunroof Front Drain Hose - Compatible with 2006-2013 Land Rover Range Rover Sport

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

munirater 2 Pcs Black Roof Trim Molding Sealing Strip Kit Replacement for 2003-2008 Toyota Corolla

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • These are flexible plastic trim pieces that you place onto your roof or roof's existing moldings. Each piece has a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. Each molding is 5/8 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THESE SIZES WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

Automotive Authority LLC Chrome Roof Trim Molding Kit For 2004-2008 Nissan Maxima 2005 2006 2007

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock