Reviews Brass Rods For Welding Projects

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

FOXBC 64-1/2 Inch Bandsaw Blades, 64-1/2-Inch X 1/2\ X 14/18 TPI for Metal Cutting

  • 64-1/2-Inch x 1/2" X 0.025 X 14/18 TPI Band Saw Blades for Metal Cutting.
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 64-1/2" long 1/2" wide blade.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Fits all band saws requiring a 64-1/2" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

Timsec 2Packs AC Copper Pipe Extension Joint Connectors Air Conditioning Pipe Coupling Adapters with Flare Nuts and Connectors Free Welding For Butt Copper Tube Diameter 1/4 6.35mm

  • [100% BRASS ADAPTER] - The AC pipe joint connectors are all made by heavy duty brass, sturdy, durable, corrosion resistant and anti-rust..
  • [SPECIFICATION] - Fit for copper pipe Diameter 1/4" (6.35mm)..
  • [APPLICATION] - The AC pipe jointers are designed to connect two copper pipes without welding. The connection can be tightened with a wrench, sturdy and durable. This flare fittings can also be applied in fuel and gas systems, plumbing, refrigeration, and vacuum applications..
  • [EASY TO INSTALL] - The joint is used to lengthen the AC copper tubes. The DIY projects can be finished by household tools without a special welding machine..
  • [PACKAGE INCLUDES] – The package includes 2pcs solid brass connectors and 4pcs Flare Nuts..
Check Stock

AR-PRO (2-Pack) 5/8” x 36” Zinc Plated Steel Rods Designed for Use as an Axle Shaft on Hand Trucks Dollies Wagons 4005BC Wheelbarrows

  • These smooth rods are almost impossible to bend as they have undergone a cold rolling process, increasing the steel’s strength by up to 20% and ensuring tight tolerances. These rods’ zinc plating exponentially increases their corrosion resistance for both indoor and outdoor heavy-duty use..
  • If you are looking for a replacement axle for your wheeled equipment, these smooth rods are the perfect solution. Compatible with most wheelbarrows, hand trucks, dollies, wagons, yard trailers, beach carts, and pressure washers with 5/8 inch axles..
  • These smooth rods are also compatible with 5/8 inch axle cap nuts and shaft collars.Each stick weighs about 3 pounds.
  • Versatile and easy to work with, you’ll find that these rods are perfect not only as axles for utility and garden equipment but also for various DIY projects! Cut to size with a cutting torch, rotary tool (with metal cutting disks), cut-off wheel, or hacksaw. You can also drill holes for cotter pins, thread the ends, or machine to your desired size and shape..
  • Caution: These smooth rods are not suitable for welding, as welds can destroy the zinc plating and release of zinc oxide fumes..
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

FOXBC 62\ x 1/2\ x 14 TPI Band Saw Blade Fits Craftsman, Delta, POWERTEC, Ryobi, Wen, Skil 9\ Bandsaw Metal Cutting

  • 62-Inch x 1/2" X 0.025 X 14 TPI Band Saw Blades for Metal Cutting.
  • Fits all band saws requiring a 62" long 1/2" wide blade.
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring 62" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock