Reviews Brass Nozzle For 3d Printer

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

3D Printer Nozzle Cleaning Kit - 13 Pieces 3D Print Tools 0.4mm Pin and Tweezers with Stainless Steel Wire Brush

  • Function: 3D printer accessories is perfect for removing the blockage with high precision and is also suitable for the general maintenance of the....
  • Compatibility: These 3D printer tool kit are compatible with most popular 3D printers, fit most 3D printers nozzles.
  • Uses: 1. Before use the 3D printer cleaning kit, it is recommended to heat the nozzle to 200 degrees or above (pay attention to prevent scalding).
  • Material: High quality stainless steel, the pin tip is smooth and sharp with high strength and toughness, suitable for mild maintenance of nozzle and....
  • Package contents: you will receive 10 pieces of stainless steel nozzle cleaning pins, 1 storage box, 1 copper wire cleaning brush, 2 pieces of....
Check Stock

25PCS 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.2 0.3 0.4 0.5 0.6 0.8 1.0 mm

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to....
  • Package Include--Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 7 x 0.4mm, 3 x 0.5mm, 3x....
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, Anycubic, compatible with all 1.75mm PLA ABS 3D....
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

3D Printer Nozzles, 30PCS Hardened Steel and Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Cleaning Tool Kit for CR-10/ Ender 3/5 , Ender 3/ V2 Ender3 pro

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best pr....
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

26PCS 3D Printer Nozzles Kit,MK8 3D Printer Extruder Nozzles Compatible with Creality Ender 3 Ender 3 v2 Ender 3 pro Ender 5 Ender 5 pro CR-10 and so on,3D Printer Nozzle Wrench

  • Wide compatibility : nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
  • Storage box : convenient for you to carry and store.
  • Practical wrench : A special wrench suitable for nozzles of MK8, which not only makes the adjustment and replacement of the nozzle easier, but also....
  • Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
  • Value for money: package comes with 4 pieces of hardened steel nozzles, 16 pieces brass nozzles, 1 Nozzle Spanner ,5 nozzle cleaning needles, fficient....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock