Reviews Brass Flange Ball Valve

HZR Copper Ball Valve Internal Water Pipe Equipment Accessory

  • Hand tightening provides reducing the risk of leakage and self-locking type design, more convenient for you to use..
  • Brass for corrosion resistance, ductility at high temperatures, and low permeability and valve requires no special tools ..
  • Working medium: natural gas, liquefied petroleum gas, and each valve individually tested for maximum safety..
  • It was widely used in irrigation systems, pipeline systems, oil and gas supply systems with different size and colours..
  • Copper ball valve thick brass inner wire for tap water switch, water valve and water pipe valve..
Check Stock

Harvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD

  • (1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
  • (1) Square D 30-50 Pressure switch, 40-60 available in other listing.
  • (1) 1/2" 100 psi Brass Pressure Relief Valve.
  • (1) Roll of 3/4" x 520" 3.5 mils Thread tape.
Check Stock

SunCleanse Shower Faucet System with 8 Inches Rain Shower Head, Wall Mounted Shower Combo Set for Bathroom, Polished Chrome (Included Rough-In Valve Body and Trim)

  • ... 1/2 NPT tapered threads, compatible with most existing shower systems. All hardwares and parts are included. All parts are separated by epe cushioning (pearl cotton) package to prevent damage in transit..
  • PACKAGE CONTENT: Rough-in valve and trim included (no need to pay for extra money), stainless steel shower arm, flange, 8 inch raninfall shower head, brass handshower,hardware pack and free plumber's tape,150cm(60 inch)shower hose and detailed installation instructions..
  • BEST SERVICE: Our shower combo set has 5 years replacement that any parts. We own a professional support team to help you solve the problems within 24 hours, and if you are not satisfied with our wall-mounted shower head set, we promise a free replacement or a full refund..
Check Stock

Bundled products of SunCleanse Polished Chrome Shower Faucet System with 8 Inches Rain Shower Head, Wall Mounted Shower Combo Set for Bathroom,and Toilet Paper Stand

  • .../2 NPT tapered threads, compatible with most existing shower systems. All hardwares and parts are included. All parts are separated by epe cushioning (pearl cotton) package to prevent damage in transit..
  • [PACKAGE CONTENT]: Rough-in valve and trim included (no need to pay for extra money), stainless steel shower arm, flange, 8 inch raninfall shower head, brass handshower,hardware pack and free plumber's tape,150cm(60 inch)shower hose and detailed installation instructions..
  • [Considerate Design]: Our Toilet Paper Roll Holder Has an Arc design to put and take toilet paper easily.
  • Tall storage rack holds up to extra 3 Mega rolls of toilet paper, ensuring you always have new rolls. A high raised base ensure toilet paper does not touch the bathroom floor, keeping toilet paper clean all the time..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • ...male BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
  • 【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

KES Rain Shower Head Shower Faucets Sets Complete Shower Valve and Trim Kit Wall Mount Brushed Nickel Pressure Balance Shower System XB6202-BN

  • cUPC Certified Pressure Balance Cartridge: The advanced pressure balance ceramic disc cartridge with cUPC certification can prevent scald injury....
  • Premium Brass Faucet: Built to last, easy to use with brass faucet body for longevity and durability. Moreover, our connection is standardized 1/2 NPT....
  • Stainless Steel Shower Arm: Total length of shower arm is 15.7-Inch (398mm), constructed from high quality SUS304 stainless steel. Flange included..
  • Extra-Large Rainfall Shower Head: 8-Inch by 8-Inch (20 CM) overhead shower provides rainfall bathing experience, soothe you after a day’s work.....
  • Package includes rough-in valve, faceplate, handle, shower arm, flange, 8" rain shower head. (Note: The tub faucet is not included in the product.)The....
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...m the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with dif....
Check Stock