Reviews Brake Switch

Brake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • ...high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
  • 【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
  • 【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
  • 【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
  • 【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality problems, you can return or exchange it. If you have any questions, please feel f....
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

Ryobi RTS10 10\ Table Saw Replacement Rip Fence Assembly # 089037007706

  • Revolutionary SawStop protection: Standard brake cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury.
  • Compatible with all standard 10″ blades. Replaces TSBC-10R2 (equivalent to TSBC-10R2). Not compatible with CB Model Saws (CB Model Saws use TSBC-10L).
  • Compatible with all woods and other non-conductive materials.
  • 1 locking key allows the user to quickly and easily switch between the standard brake cartridge and dado brake cartridge when making standard or dado cuts.
Check Stock

Bike Brakes Lever, Durable 2 Wires Left & Right E-Bike Bicycle Electric Brake Lever Replacement Parts (1 Pair)

  • 【Durability And High Stability】This pair of handlebar grip constructed of sturdy aluminum alloy, high performance of durability and stability, make your riding safer.
  • 【Sensitive Control】The handlebar grip are design according to ergonomics, good for comfortable and anti-skid holding, fast brake, can easily control your bike or scooter. Sensitive control, make your ride more secure.
  • 【No Negative Pole Or Positive Pole】Easy to install and use, The 1.5 m deep brake cable has no negative pole or positive pole distinction and can be connected to the electric brake switch as required.
  • 【Suitable for】Bicycle brake handle suitable for many kinds of cycling bikes with 22.5mm handlebar, such as mountain bike, road bike and more.
  • 【Great Accessories】 Wonderful replacement part for your old or damaged brake lever of bike.
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one person supports 2 power modes: 12V batteries & 110V/220V power outlet, which allows you to exchange brake fluid any time and anywhere - An essential auto tool for personal owner garage or repair stores.
  • ⛽【Standard & Master Modes】The brake fluid exchanger is available in Standard and Master modes. Please se....
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

DEWALT Angle Grinder, RAT Tail, 7-Inch, 13-Amp (DWE43840CN)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake stops wheel in 4 seconds or less on average using DW8826 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock

12PCS Brake Switch Stopper Car Brake Light Switch Automotive Clutch Pedal Stopper Stopper Brake Switch Pad 90541-06036

  • High Quality - Brake pedal pads are made of automotive grade plastic, With excellent mechanical strength, Good wear and corrosion resistance, Not easy....
  • Size - The brake light plug is approx. 1.8x1 cm / 0.71x0.4 inches, Easy to carry and store without taking up too much space..
  • Function - When the car brake light is always on, you need to repair it immediately to ensure driving safety, our clutch pedal limiter can solve the....
  • Included - You will get 12 brake light switch plugs, enough quantity for your replacement car parts needs, Suitable for most cars, trucks or other....
  • 100% Satisfaction If you have any questions, please contact us directly, we will provide after-sales service..
Check Stock

DEWALT Angle Grinder, Paddle Switch, 5-Inch / 6-Inch, 13-Amp (DWE43244N)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake of the metal grinder stops wheel in 1 second or less on average using DWA8824 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock