Reviews Brake Fluid Tube Connector

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

WFLNHB 7L Manual Oil Fluid Converter Oil Extractor Pump Transfer Tank Fit for The Extraction of Liquids

  • Fit for most fluid extraction applications,comes with 4 different size extraction tube,meet your different demands..
  • Fit for most kinds of motor vehicles,motorcycles,marine engines and industrial machinery.Can be used to extract engine oil from,brake fluid and lubricant oil from machine and car,water from fish tank and more..
  • The product has passed strict quality test before leaving the factory.Adopt polyethylene structure,no rust,corrosion resistance..
  • Moderate size,easy to carry,you can easily put it in the trunk of your car..
  • Manual pump with ergonomic grip to complete the fluid extraction independently..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
  • EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
  • 5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
  • EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
Check Stock

Utah Pneumatic 1/4\ Air Line Od 50 Feet SAEJ844 Air Brake Tubing Nylon Air Ride Hose DOT Approved for Air Brake System Or Fluid Transfer 1/4\ Air Hose(1/4\ air hose 50 feet)

  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 pneumatic tubing air brake tube.
  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 dot airline.
  • Item:PA Nylon hose. Usage:Air brake system,air or fluid transfer use with Air brake hose 1/4 dot tubing.
  • Size:1/4".Pipe Thickness 1mm Bending radius 40mm air horn tubing.
  • Weight 190Gr/10Meter.Material Polyamide air bag hose.
Check Stock

NEXPEAK Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool …

  • Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or....
  • Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • 5 LED indicates you the test result and tells you brake fluid quality, it is convenient to know if the brake fluid is healthy or not..
  • Battery: 1 x AAA/1.5V (not included). When the green LED doesn’t light up, it means the battery has run out of power and need to replace a new....
  • Attention: wash the test probe with tab water after every use..
Check Stock

Mityvac MV8000 Professional Single Person Manual Brake and Clutch Bleeding Tune-up Kit

  • The MV8000 kit includes: Selectline hand-vacuum pump (Model MV8010).
  • (4) connection tubes (24", 1-1/2", 3", 3-5/8") and cupped and tube adapters..
  • Performs one-person engine performance diagnostics, vacuum brake and clutch bleeding, fluid transfer, evacuation, sampling, windshield repair, turbocharger testing and diesel fuel priming..
Check Stock

Maisto Ducati 4PK Motorcycle

  • EASY TO INSTALL-Just simply slip it onto your motorcycles brake/clutch reservoir's and cover up those plastic reservoirs while adding a nice touch to your bike.
  • NICE DESIGN-Excellent logo fully covered on the reservoir sock covers.
  • GOOD PROTECTION - Traps and absorbs brake fluid that's vented from the reservoir, prevents brake fluid from getting on your helmet and/or your motorcycle, damaging paint and corroding metals.
  • PERFECT SIZE - This motorcycle reservoir cover will fit on most motorcycle clutch or brake fluid reservoir.
  • FLEXIBLE MATERIAL- Made from elasticated black cotton with high density embroidered logo will expand to fit most front brake reservoirs.
Check Stock