Reviews Brake Fluid Level Sensor Kit

Voilamart Electric Bicycle Kit 26' Rear Wheel 48V 1000W E-Bike Conversion Kit with LCD Display, Cycling Hub Motor with Intelligent Controller and PAS System for Road Bike

  • 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed.
  • Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit..
  • Dual Mode Controller: Motor works under Hall effect and non-Hall effect, extend life for electric bike ebike conversion kit..
  • LCD display shows battery level and pedal assistance settings.
  • Brake Levers cut off the power supply to the motor safely.
  • Twist throttle has battery level display.
  • Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual, LCD Meter. (Note: Battery not included).
  • 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required..
Check Stock

OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters

  • POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
  • Meant to be used with a hand vacuum brake bleeder.
  • ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
  • Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
  • REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
  • Check that your vehicle’s power steering reservoir....
  • HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
  • DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....
Check Stock

3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters

  • ◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
  • ◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
  • ◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
  • ◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
  • ◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.
Check Stock

Brake Bleeder Kit Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Brake Bleeder Adapters Reservoir Hoses for Brake Fluid Power Steering Handdeld Vacuum Pump Brake System Bleeding Tools

  • UNIVERSAL BLEEDING KIT: Orion Motor Tech's vacuum bleeder with an adapter set works with nearly any vehicle's system and lets you bleed your brakes,....
  • SUPERIOR DURABILITY: The easy-to-use brake bleeder pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized....
  • HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
  • WIDE APPLICATION: Not just for bleeding brakes, this brake bleeding kit also clears oil, power steering fluid, and other hydraulic systems.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this brake fluid bleeder kit with strong 1 year warranty and our usual friendly 24/7 customer service,....
Check Stock

BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)

  • 【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
  • the brake disc is made of high-quality steel, which is durable and has a long service life..
  • 【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
  • 【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
  • 【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
  • 【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..
Check Stock

TRQ Front & Rear Premium Posi Ceramic Disc Brake Pads & Wear Sensors Kit Compatible with BMW

  • Direct Fit, OE Replacement Disc Brake Pad Set.
  • Kit Includes: (1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware.
  • (1) Rear Ceramic Brake Pad Set with Contact Point Grease & Hardware.
  • (1) Front Driver Side Brake Pad Wear Sensor.
  • (1) Rear Passenger Side Brake Pad Wear Sensor.
  • Vehicle Specific: Check fitment information in the listing for compatibility.
  • Aftermarket Reference Number(s): 34112283865,34116764540,34116776161,34116781873,34116783542,34116784129,34116794917,34216774692,34216790761,BFS00189,BFS00217,EHT918.
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

Brake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • 【What does it do?】 If the moisture content of the car's brake fluid is too high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
  • 【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
  • 【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
  • 【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
  • 【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality pr....
Check Stock