Reviews Brake Fittings

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
This hose meets federal standards to ensure performance and safety, while providing longer hose life.
It utilizes premium fittings to ensure a good hydraulic seal.
Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.

【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).

Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35.
For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
Many local parts stores rent out flaring tools free.

High Temp Copper Anti-seize Grease For Threaded Fittings Bolts & Nuts.
Reduces Galling, Seizing, Welding & Carbon Fusion Providing A Dry-Film of Protective Solids On Threads.
Reducing Total Amount of Torque Needed For Easier Disassembly.
Copper Fortified Grease Compound Unaffected By Severe Temperatures, Vibration, Expansion And Contraction.
Excellent Brake Lube Antiseize For Brake Pins and Brake Cam Assemblies Subject To Extreme Conditions: Water, Steam, Chemicals, Extreme Pressure, Rust & Corrosion.
Protects: Nuts, Bolts, Screws, Sprockets, Chains, Spark Plugs, Gaskets, Valve Assemblies, Splines, Gears & Conveyors.

Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.

High Temp Aluminum Anti-seize Grease For Threaded Fittings Bolts & Nuts.
Reduces Galling, Seizing, Welding & Carbon Fusion Providing A Dry-Film of Protective Solids On Threads.
Reducing Total Amount of Torque Needed For....
As BustApart Aluminum Anti-Seize Is Free Of Copper, It Can Be Safely Used On Stainless Steel Or Other Sensitive Alloys.
Excellent Brake Lube Antiseize For Brake Pins and Brake Cam Assemblies Subject To Extreme Conditions Of Water, Steam, Chemicals, Rust, & Corrosion..
Protects: Nuts, Bolts, Screws, Sprockets, Chains, Spark Plugs, Gaskets, Valve Assemblies, Splines, Gears & Conveyors. Do Not Use On Oxygen Systems.

Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knob.
Valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt.
Valve also includes two fittings to adapt to 3/16 inch brake line.
Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall.

D.O.T. Compression style fittings for repairing truck and trailer air brake lines.
For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements.
Ribbed sleeve for compression and positive grip.
Meets D.O.T. FM's 571.106, SAE J246 and SAE J1131.