Reviews Brake Caliper Guide Pin Bolt

Motormite 21151 Drum Brake Bar

  • 13pcs Kits Rotates Piston Back Into Caliper Replacement forting Of New Brake Shoes And Pads.
  • This Tool Kit Allows You to Rewind the Pistons In Brake Calipers By Hand, Without Damaging the Gaskets in the Pistons and Seals.
  • Precisely Made Adaptor Plates with Thrust Bolt Assembly and Reaction Plate.
  • Includes Left And Right Handed Thrust Bolt And 12 pcs Adapters Replacement for Using In Most Domestic And Imported 2/4WD Vehicle.
  • Come With Blow Molded Carrying Case Replacement for Convenient Storage And Carrying.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • ... brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
  • NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

Kuryakyn 7789 Motorcycle Accent Accessory: Caliper Covers for Brembo Calipers for 2006-19 Harley-Davidson Motorcycles, Chrome, 1 Pair

  • Caliper covers allow you to further customize your motorcycle down to the detail.
  • Slotted design keep the air flowing so brake performance is unaffected.
  • Bolt on in minutes regardless if the bike has ABS or not.
  • Includes (1) right caliper cover, (1) left caliper cover, (4) bolt covers, and (4) 6-32 x 3/16" set screws.
  • Suggested for installation (not included): 10 mm 12 point socket and racket and a set of hex wrenches.
  • Compatible with Harley-Davidson models: '08-'19 Electra Glides, Road Glides, Road Kings, Street Glides, '09-'13 Trikes, '06-'11 V-Rods (excludes '06-'07 VRSCR Street Rod and '09-'11 VRSCF V-Rod Muscle).
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

5Pcs Banjo Bolt Washer M10X1.0mm, Banjo Bolts And Fittings Iron Banjo Bolt Gasket Sealing Washer Kit for Brake Caliper Master Cylinder

  • 【Banjo Bolt Fitting Kit】-- Comes with 5 Brake Banjo Bolts & 10 Washer. Neat threads, not easy to slip.
  • 【2 Sizes】-- 2 standard size banjo bolt fitting M10 x 1.25mm and M10 * 1.0mm for your option.
  • 【Durable & Solid】-- Made by high quality iron, our banjo bolts kit is durable and solid, sturdy for long use term.
  • 【For Most Motorcycles】-- This banjo bolt fitting fits for most motorcycles brake caliper, brake clutch master/slave cylinder and radiates energy hose.
  • 【Quality Assurance】-- 100% test before shipping to ensure product perfect, stability and durability. If you are not satisfied with our Motorcycle Brake Bolts, we accept all of the return, replacement or refund requests.
Check Stock

Mountain Bike Disk Brake Set G3/ HS1 Bicycle Disc Brake Kit Front and Rear 160mm Caliper Rotor with Bolts and Cable (HS1 A Disc Brake Set)

  • F160R140mm--front clipers,means choosing the 160mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 140mm rotor.
  • F180R160mm--front clipers,means choosing the 180mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 160mm rotor.
  • It is general for mountain bikes and electric bicycle?Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 44mm..
  • Disc brake Rotor, disc brake caliper and to make the disc brake pads can not be stained with oil, change the disc brake caliper or to make the disc brake pad before the rotors to avoid oil on the disc brake disc will affect the brake effect, you can use alcohol to clean the disc brake rotors..
Check Stock

labwork Rear Axle Kit Brake Hub Disc Rotor T8F Chain Sproket Replacement for Go Kart Drift Trike Cart

  • This is a high class and durable live axle kit, perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • Fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
  • For more size information, refer to the second image.
  • Package includes: (1) Axle Assembly, (1) Brake Master Cylinder Caliper Assembly, (1) Chain Sprocket, (1) Brake Disc, (2) Pillow Block.
Check Stock