Reviews Brake Adapter

WISPAUSU Air Brake Caliper Piston Compression Tool Kit 23PCS Pneumatic Brake Pump Adjusting Wind Back Tool Brake Caliper Piston Rewind Tool

  • Air Brake Caliper Tool - 23PCS Pneumatic Brake Caliper Wind Back Tool Kit, perfect for Brake DIY Enthusiasts or Mechanics. Easy to rewind your brake caliper piston with the Pneumatic Caliper Piston Compressor Tool..
  • Easy to Use - The tool attachs the adapter quickly and firmly by its magnetic plate. Easy to turned the windling handle 360-degree clockwise anticlockwise. Press its button to quick release pressure..
  • What You Get - 1pcs air operated brake compressor tool, 22pcs adapters that fit to the piston, and 1PCS hard plastic suitcase. Made of high carbon-steel..
  • Wide Applications - Adapters compatible with most vehicles, such as Alfa Romeo Audi BMW Citroen Dacia Fiat Ford GM Honda Hyundai Iveco Jaguar Lancia Mazda Mercedes Mini Mitsubishi Nissan Opel Peugeot Renault Saab Seat Skoda Suzuki Toyota Vauxhall Volvo VW, etc..
  • 1 Year Warranty - We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

YEENOR MT200 MTB Hydraulic Disc Brake Set, Left Front 800mm Right Rear 1400mm Aluminum Alloy Bike Bicycle Brake Fit for Shimano Mountain Bike XC Trail/e-Bike/Fat Bike

  • 【Brake Set size】MT200 for Shimano hydraulic brake, the left front brake hose length is 800mm, and the right rear brake hose length is 1400mm.pre-installed with resin pad B01S.160mm rotor compatible by default, IS/PM universal. Suitable for all sizes of handlebars..
  • 【Easy braking】MTB hydraulic oil brakes, dual piston brakes, no matter how fast the bike is going, how steep the terrain is, how wet the environment is, a gentle pull on the brake lever will stop the bike immediately..
  • 【Quick Installation】The MTB hydraulic brake set comes with a 160mm PM/IS universal mounting adapter for direct installation and use. no need to assemble, it can be installed out of the box..
  • 【Sturdy and durable】Remember it fits SHIMANO, the precision manufacturing process ensures its durability. High strength aluminum alloy brake lever is not easily damaged and more wear-resistant. Resin pad has better heat dissipation and better braking effect. Less maintenance, Provides a safer ride..
  • 【Conforms to human body design】 The three-finger brake lever is designed according to the human body. The brakes are easy to operate, front and rear, left and right, and the sufficiently long fuel line can be adapted to almost all models..
Check Stock

VLUOO Brake Bleed Kit Bicycle Hydraulic Disc Brake Oil Mineral for Shimano, TEKTRO, MAGURA, SRAM Series Bike Brake Repair Tools

  • All-round disc brake oil change tool kit. View the various brake oil video tutorials by scanning the QR code on the mobile phone..
  • The low resistance oiler is made of plastic steel and its chemical stability exceeds m-edical standards.All-round disc brake oil change tool kit..
  • A chemically stable low resistivity injector can provide an objective smoothness even when pushing a high consistency shock absorber without decay due to prolonged use..
  • 【Two Types Of Oil Storage】Filling Cylinder And Funnel, Which Can Deal With The Brake Handle Of Any Structure Flexibly. Can Be Used To Collect Waste Oil When The Bottle Is Linked To The Caliper..
  • 【Support three oil injection methods】syringe+funnel，syringe+funnel adapter，syringe+bottle..
Check Stock

BUCKLOS Shimano MT200 MTB Hydraulic Disc Brakes Set with 160mm Rotors Front Left 800mm Rear Right 1550mm/1650mm Mountain Bike Hydraulic Brake Aluminum Alloy Levers with Calipers

  • Massive stopping power：Shimano hydraulic brakes is the best Upgrade kit from mechanical brake, dual-piston line pulling hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
  • Quiet braking: The brake pad of this bicycle disc caliper is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
  • Compatible most bikes: shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike (You only need to consider whether the tubing is long enough, package not inclued adapter).
  • Easy to install: shimano brake kit uses mineral oil fluid(pre bled), unboxing Ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad.
  • Brake size: for Bucklos mtb disc brake,left side controls the front, right side controls the rear, cable of front is 800mm, cable of rear is 1550mm..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • ...: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

  • Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
  • Automatic shut-off valve prevents overfilling.
  • Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
  • Reservoir is constructed of durable polyethylene and will not rust or corrode.
  • Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ...der valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used fluid bottle, 24 oz filler bottle. 4 Master Cylinder Reservoir Adapters: 1.25 in.-1.6....
Check Stock

ARES 18028 - Heavy Duty Brake Pad Spreader - Built-in Comfort Tightening Knob - Heavy-Duty Steel Construction - Solid Steel Swivel Joint for Precise and Even Compression

  • SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use..
  • DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly..
  • COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Heavy Duty Brake Pad Spreader, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. Wit....
Check Stock