Reviews Braided Tubing

BriskHeat BWH051020L XtremeFLEX BWH High Temperature Heavy Insulated Heating Tape, W x L: 0.5 x 24-Inch, 120VAC, Same End Leads

  • High temperature, heavy insulated heating tape is constructed of a knitted and double-braided Samox outer sheath cover that is suitable for electrically conductive surfaces.
  • Maximum exposure temperature: 1400 degree F (760 degree C).
  • power density: 13.1w/sq. in (0.020w/sq. mm).
  • includes high-temperature tie-downs for easy installation.
  • Perfect for heating laboratory apparatus, gas tubing, temporary heat, valves, and more.
  • requires temperature controller (sold separately).
Check Stock

Farbetter 10000mm/ 32.8ft x 5.0mm Bike Brake Hydraulic Hose Bicycle Hydraulic Disc Brake Hose 10000PSI Universal

  • The length of the 10000mm/ 32.8ft can be cut according to your needs, and it is enough for you to update five bikes..
  • Made in Taiwan, and the original quality is the best choice for you to replace the brake parts of your bike..
  • Brake hose is made of inner liner tube + braided yarn + nylon outer layer, burst coefficient above 10000PSI and tubing ruler of 2.0*5.0mm..
  • Compatible with the Bicycle Hydraulic Disc Brake systems of most common bicycle brands..
  • For your convenience, it is recommended to match our products--Needle Driver Insertion Tool and Brake Hose Cutter (Search ASIN: B0831S34XN).
Check Stock

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

  • PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm..
  • BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 10 feet long enough for a wide range of applications..
  • QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance..
  • BENDABLE ◀The 3/8 transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
  • WIDE APPLICATION ◀ The 6an fuel line i....
Check Stock

GLS Audio Instrument Cable - 1/4 Inch TS to 1/4 Inch Instrument Cable for Bass/Electric Guitar- Brown/Yellow Braided Tweed, 15ft

  • Engineered with precision, our electric guitar cord is built with oxygen-free copper in both the center conductor and insulator shield.
  • Designed for convenience, our supple guitar chord has a flexible braided tweed jacket that coils neatly, without any twisting and tangling.
  • Built to last, our instrument cables have external & internal rubber heat shrink strain tubing for years of trouble-free usage.
  • Our electric guitar cable measures out at 38 picofarads per foot, for the best audio quality with the lowest capacitance.
  • Designed with the finest materials, our guitar amp cord features an OFC insulator shield & conductive PVC shield.
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Aquascape Pro Air 20 Pond Aerator and Aeration Kit with Tubing and Self-Cleaning Diffuser, Out-door Rated| 61009

  • COMPLETE PRO-GRADE AERATION KIT: Comes complete with outdoor-rated, weather-proof, energy-efficient 15 watt compressor, (1) clog-resistant Rubber Membrane Aeration Diffusers and (1) 30-feet rolls of high-quality durable braided tubing.
  • EFFECTIVE OXYGENATION: Powerful air flow rates and with powerful, yet energy-efficient pump, provides oxygenation levels to keep water clean and clear.
  • IMPROVES POND CONDITIONS: Designed for ponds up to 5,000 gallons, the Pro Air 20 provides 0.71 CFM of maximum airflow to promote healthier water, fish, and plants.
  • SAFE AND DURABLE: UL Certification means that you can have peace-of-mind knowing that this aerator is safe for you and your fish. Aquascape's rigorous product standards, engineering and construction will ensure years of trouble-free operations.
  • LEADING WARRANTY COVERAGE: Backed by a 3-Year Limited Warranty by Aquascape Inc, the leading pond and water feature innovator in North America for over 25 years..
Check Stock

Rhinox Aquarium Airline Tubing Set, DIY CO2 Diffuser Kit, 6-Feet Airline Tubing, 2 Air Stones and Check Valves, 4 Connectors, 6 Suction Cups

  • Includes Necessary Pieces For Airline Setup --- All-inclusive and ready to install, the Rhinox Aquarium Airline Tubing Set contains all the required parts needed to set up your air pump system. Each kit comes complete with high quality connectors and check valves, secure suction cups, two air stones and 6 feet of clear airline tubing..
  • Flexible Plastic Tubing --- It is crucial that the airline tubing in your water pump system is made with a durable and reliable plastic material that is bendable. The 3/16” airline tubing from Rhinox is strong enough not to break under pressure, yet flexible enough to wrap around your aquarium equipment without getting snagged or affecting the air flow..
  • Flexible Plastic Tubing --- All of the components of the Rhinox Aquarium Airline Tubing Set are designed to be compact and discreet to add very little distraction to your underwater environment. The airline tubing, su....
Check Stock

Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer Not for Ender 5

  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work....
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the....
  • With more terminal housing and pins as spare parts, in case fail installation and waste ..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock