Reviews Bowden Connector Kit

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

HICTOP All Metal Extruder Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

  • [UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5..
  • [Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [EASY OPERATION]: DIY kit and you need to assemble by yourself..
  • [SERVICE COMMITMENTS]: We offer 1 YEAR Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

  • Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
  • Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
  • Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.
Check Stock

Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament

  • 100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing..
  • Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifet....
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock

HitLights LED Strip Connector 2Pin 8mm LED Connector Kit Include Solderless Gapless Connector, 6Inch Jumper Connector, DC Female and Connector, DC Jack Splitter for 3528 5050 LED Strip

  • 【USE FOR 2835 3528 LED Strip】The gapless LED connector, jumper connector, and DC female and connector can use for 8mm 3528 or 2835 High Density led strip light. The DC jack splitter use for all led tape lights..
  • 【LED Connector Kit Package Included】 8 x Gapless Connectors, 6 x LED Jumper Connector, 4 x Female and DC Connector, 2 x 2way DC Splitters. 8mm LED Connector Kit can meet almost all the needs for hanging up LED light strips..
  • 【8mm LED Strip Complete Solution】This is a complete DIY led light strip accessory kit that provides the perfect solution for your furniture, cabinets, and more..
  • 【Easy Installation】Simple installation,connect according to the positive and negative terminals of the connector, simply slot the strip light into connector and clamp the cover. No welding and other processes are required.
  • 【HitLights Quality Warranty】90 days refund, 1 year warranty. You can contact our customer service at any time to help solve installation and after-sales problems (reply within 24 hours)..
Check Stock

133ft Irrigation Drip Kit, Automatic Plant Watering System with 40m 1/4 inch Distribution Tubing Hose, Adjustable Nozzle Emitters Sprinkler

  • 133FT Drip Irrigation Kit: This micro drip irrigation kit is suitable for an area of 130 square feet. 1/4” 133ft irrigation tubing kit, 1 x Y shape 2-way faucet connector, 1 x 1/4”Tubing Quick Connector, 1 x 3/4'' threaded faucet connector, 2 x Universal connector, 10 x pressure compensating emitters, 20 x atomizing drippers, 10 x adjustable drippers, 1 x tape, 100 x connectivity accessories. 145 pcs watering system could meet all your basic drip needs..
  • 2-Way Connector: The connector can divide the water up to 4 main tributaries, each tube works independently, you can watering different plants with different water pressure at the same time..
  • Save Up to 70% Water: greenhouse watering system could 70% water compares to watering by yourself. Don't worry about your plants anymore when traveling..
  • Tree Type Dipper: Comes with 3 types of drippers, pressure compensating emitters average velocity effluent 8 liter/hour, 2 types adjustable drippers could produce water flow with different speeds, it can meet the water demand of different plants at one time..
  • Wide Applications: this auto irrigation drip kit is great for agriculture, lawn, garden, patio, greenhouse, flower bed, swimming pool, misting fog cooling irrigation and so on.
Check Stock