Reviews Boring Inserts

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

  • ♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
  • ♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • ♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
  • ♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

Accusize Industrial Tools Sclcr 4 Pc Indexable Boring Bar Set with 14 Carbide Cvd Coating Ccmt32.51 Inserts 1/2 5/8 3/4 1 P252-S416

  • SCLCR 4 Pc Indexable Boring Bar Set with 14 CCMT32.51 Inserts, 1/2, 5/8, 3/4, & 1".
  • Extreme Gloss Finish. Negative 5Degree End side cutting angle.
  • Utilizes 80Degree Diamond CCMT inserts. Bar hardness approx. 45HRC.
  • The insert is securely held with a torx screw to reduce tool slipping.
  • 1 each of 1/2'', 5/8", 3/4'' and 1" and CCMT 32.51 Carbide Black/Yellow Inserts.
Check Stock

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

  • Small hole capacity: minimum of .430''. TCMT inserts.
  • Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
  • Bar is made of heat treated, precision ground alloy steel.
  • 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
  • 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check Stock

HHIP 3900-5308 Bushing for A Series S Holder 40-Position Tool Post, MT2 Taper, 1-3/16\ Holder Hole Diameter

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.
Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

  • Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
  • Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

  • Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
  • Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme fine gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock