Reviews Bones Bearing Press Puller

8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit

  • [APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively..
  • [EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case..
  • [DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life..
  • [SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

  • [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
  • Lightweight dent puller slide hammer tool ensures maximum pull power.
  • [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
  • 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
  • [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
  • Then, pull back on the T handle, while you snap the weight towards the handle.
  • Weighted slide hammer adds torque and pull-power.
  • [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
  • [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Upper & Lower Bearing Carrier Puller with Fuel Water Separator Wrench for Yamaha, for Johnson, for Evinrude, for Mercury, for Honda

  • APPLICATION -- All fit for Yamaha. ①Upper Bearing Carrier Puller - Fit For Yamaha, Johnson, Evinrude, Suzuki, for Honda and Mercury upper bearing carrier (NOTE: with carrier style upper bearing housing)②Lower Bearing Carrier Puller - Fits For Yamaha, Johnson, Evinrude, Mercury (DOES NOT FIT VERADO), for Honda, Mercruiser.③Wrench - Fit For Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+.
  • FUNCTION -- ①Puller works wonderfully for removing the bearing carrier oil seal and other tasks where a bearing puller is needed.②Wrench is specially designed to remove fuel water separator cup..
  • BENEFITS -- ①Save time and No more prying against seal surfaces. Removes toughest Lower bearing carriers effortlessly with no damage to the carriers.②Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring..
  • ADJUSTABLE -- Fits most gearcases 115hp and above. Adjustable arms allows it to be used on a variety of different sized outboard and outdrive / stern drive lower units..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 mon....
Check Stock