Reviews Body Shop Tools Slide Hammer

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

  • [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
  • Lightweight dent puller slide hammer tool ensures maximum pull power.
  • [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
  • 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
  • [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
  • Then, pull back on the T handle, while you snap the weight towards the handle.
  • Weighted slide hammer adds torque and pull-power.
  • [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
  • [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....
Check Stock

Tangtanggo Paintless Dent Repair Kit - Dent Puller Slide Hammer with 42pcs Dent Puller Tabs for Car Dent Remover Tool Kit, Auto Body Dent Repair Dent Kit

  • Includes these attachments: Rubber cover, 6pc Hasp Iron, Cast Iron Hammer, Long Tube, Hex Nut, Circular Nut, Circular Pipe, Tapping Screw, Right Angle Flat Steel, 2pc Hex Standard Component, Connector, Double Barreled Connector.
  • Slide hammer set is constructed with heat treated steel for extra strength and durability for all your pounding and pulling operations.
  • 13 pound slide hammer 24″ long, giving you a greater pulling force.
  • Hammer dent removal set can be used in auto body repairs, non-damaging removals of dents and hubcaps.
Check Stock

Mr IRONSTONE Outdoor Bar Table 46.5” Pub Height Dining Table Bistro Patio Table with Waterproof Top and Hammer Finish Stands

  • Waterproof Material: Made of waterproof hammer finish, waterproof platic board, waterproof screws and nuts and waterproof spray paint. Mr IRONSTONE....
  • Stylish Hammer Finish: The unique hammer finish design makes the bar table stunning in the home, restaurant, bar, pub, Bistro, coffee shop, kitchen,....
  • Fast Installation & Easy Cleaning: Tools and instructions that needed are included in the package. It's easy to put the desk and chair together with....
  • What You Get: A Waterproof Top, Hammer Finish Stands, adjustable feet, easy-to-follow instructions, and a simple assembly process..
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...ck to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricati....
Check Stock

VEVOR Paintless Dent Removal Rods, 89 PCS Paintless Dent Repair Tools, Golden Lifter Puller Car Dent Repair Kit, Glue Puller Tabs Dent Puller Kit for Auto Dent Removal, Minor Dents, Door Dings

  • ...nal paint of your car body. Hail damage repair kit is great to pop out dents efficiently and securely. It is also suitable for metal surfaces, like automobiles, refrigerators, motorcycles, and washing machines..
  • 89pcs Dent Removal Tools: 89 pieces of tools in the package. 10 x Rods (A6, B7-B11, C2, C4-C6), 1 x Slide Hammer, 1 x Golden Dent Lifter, 1 x Bridge Puller, 1 x Hammer, 1 x Rubber Hammer, 1 x LED Reflecting Board, 1 x Short T-bar Puller, 1 x Hot Glue Gun, 66 x Puller Tabs, 10 x Glue Sticks, 1 x Tap Down with 9 heads, 1 x Plastic Shovel, 1 x Empty Bottle, 1 x Tool Bag, 2 x Woven Bags. All the above tools allow you to repair different dents easily..
  • Save Energy And Time: According to our tips, you can quickly learn how to use these tools. Apply the heated glue stick to the puller tabs. Attach tabs to the depression.
  • wait about 2mins. Place the dent lifter and pull slowly. Spray a little alcohol, shovel off the glue. One large bag and two middle woven bags are provided, making the tools are portable. You can use them at any time and anywhere. You never need to pay many dollars each time in automotive repair shops..
  • 10pcs Dent Removal Rods: There are 10 rods of different sizes (A6, B7-B11, C2, C4-C6). Each has a different amplitude and can be p....
Check Stock

VEVOR Paintless Dent Removal Rods, 68 PCS Paintless Dent Repair Tools, 10 PCS Stainless Steel Rods Car Dent Repair Kit, Glue Puller Tabs Dent Puller Kit for Auto Dent Removal, Minor Dents, Door Dings

  • ...he original paint of your car body. Hail damage repair kit is great to pop out dents efficiently and securely. It is also suitable for metal surfaces, like automobiles, refrigerators, motorcycles, and washing machines..
  • 68pcs Dent Removal Tools: 68 pieces of tools in the package. 10 x Rods (B8-B11, C1-C6), 1 x Slide Hammer, 1 x Hammer, 1 x T-bar Hail Hammer, 1 x Hot Glue Gun, 1 x Bridge Puller, 34 x Puller Tabs, 20 x Glue Sticks, 1 x T-Bar Puller Dent Lifter, 1 x Golden Dent Lifter, 1 x LED Board, 1 x Tap Down with 9 heads, 1 x Yellow Plastic Shovel, 1 x Toolbag, 1 x Air Wedge. All the above tools allow you to repair different dents easily..
  • Save Energy And Time: According to our tips, you can quickly learn how to use these tools. Apply the heated glue stick to the puller tabs. Attach tabs to the depression.
  • wait about 2mins. Place the dent lifter and pull slowly. Spray a little alcohol, shovel off the glue. One large bag is provided, making the tools are portable. You can use them at any time and anywhere. You never need to pay many dollars each time in automotive repair shops..
  • 10pcs Dent Removal Rods: There are 10 rods of different sizes (B8-B11, C1-C6). Each has a different amplitude and can be perfectly repaired according to the dents on the b....
Check Stock

Olsa Tools 3 lb Dead Blow Hammer | Non-Marring Polyurethane Head | Rebound Resistant and Impact Absorbing | Soft Face Installation Tool | Professional Grade Automotive Dead Blow Mallet

  • ★ 3 lb DEAD BLOW HAMMER - This dead blow hammer is useful for delivering a solid blow while reducing rebound for better control. It provides a weighty and controlled strike while protecting your workpiece with its non-marring head. Useful for jobs small and large, this is a must-have tool for every shop!.
  • ★ REBOUND RESISTANT DESIGN - The steel shot-filled head transfers a controlled blow as the tiny steel pellets absorb much of the rebound. Whether seating a part in a vise, working on delicate auto body work, or dislodging a stubborn stuck part, the versatility of this hammer will give you ultimate control in a variety of situations..
  • ★ Professional Quality - The polyurethane head is preferred by professionals for being durable enough to withstand daily use, while still being soft enough to protect your workpiece. Sturdy all-steel construction is ready for the professional environment and can withstand heavy use..
  • ★ BUILT TO LAST - Sturdy all-steel construction is ready for the professional environment and can withstand heavy use. The comfortable non-slip grip is made from TPV which offers superior chemical-resistance and longevity compared to rubber. The best quality materials and workmanship mean this tool is built to last..
Check Stock

Eastwood Paintless Dent Repair Kit - PDR | Removes Dents Out of Metal Auto Body Panels | Auto Body Tool Set Dent Puller Kit with Slide Hammer Puller Set, Scarper Tool and Glue Gun for Car Hail Damage

  • ...high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • WHAT’S IN THE PACKAGE: Eastwood Auto Body Paintless Dent Removal Tool Kit is a must-have for any auto repair shop or home handyman! The 23 -piece kit includes a lever type dent puller, slide hammer dent puller, plastic pull buttons, electric hot glue gun, glue sticks, nylon scraper, aluminum spray bottle, blow molded case. This new product line will be sure to get the job done in no time with..
  • WARRANTY: Comes with a 1-year limited warranty. Attention California Residents – Proposition 65 Warning.
Check Stock