Reviews Blow Gun Nozzle

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ... allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

Mlife Mini Heat Gun -Portable Dual Temp Hot Air Gun with 6.5FT Cable Shovel Type Nozzle for Craft Epoxy Resin Shrink Wrap Drying Paint Electronics Embossing 140℃~380℃ 350W Orange …

  • lPowerful Dual Temp -- The high-speed gear provides 380℃ strong hot air, which is efficient to get big job done quicker. Low-speed gear providing....
  • Shovel Type Nozzle -- The heat gun comes with a production nozzle. When you need to blow some nooks and crannies, this type of nozzle will help a lot,....
  • User-Friendly --The lightweight heat gun designed with convex point and anti-skid has little holding fatigue. The built-in stand allows it to stand....
  • UL-Certified -- This tool has overheat protection, if the heat sink is blocked, the temperature comes too high, the power supply will be automatically....
  • Wide Application -- Mlife Mini Heat Gun is a multifunctional hot air gun, which is easy to use for shrinking tube, bending PVC pipe, electronics....
Check Stock

Heat Gun, MAXXHEAT 2000W Hot Air Gun Kit with Large LCD Digital Display, 140-1112℉ (60-600℃) Variable Tempe Control with 4 Nozzles for Crafts/Shrink Tubing/Wrapping

  • ...Cooling Mode & Overload Protection: Adopts delay shut down design, the heat gun will automatically blow out the hot air for 10S after powered off. And the integrated overload protection function will blocks the heating element and prevents burning when overheat, which will prolong the device life and safety..
  • ▶4 Nozzles & Wide Application: Digital heat gun comes with 4 versatile nozzles ( tower nozzle, hook nozzle, reduction nozzle,deflector nozzle), which are ideal use for shrink wrapping, soldering, epoxy resin bubble removal, stripping/drying paint, heating PVC tubes, loosening rusted bolts, electronics repair and other heating or thawing purpose..
Check Stock

WYNNsky Heavy Duty Air Seat Blow Gun Kit for Truck 1/4 Inch × 11.5 Feet PU Coil Air Hose Lever Air Blow Gun with 2 Tips

  • Quickly stall by splicing Air Seat Supply to 1/4 inch NTA Air Line Tee..
  • 1/4 Inch NPT threads air inlet lever air blow gun with 2 nozzle attachments..
  • Polyurethane material features light weight, high wear resistance..
  • This air seat blow gun is used on truck, bus, etc. And it comes with 1 year warrant..
Check Stock

Campbell Hausfeld 3 gallon Air Compressor with Inflation Kit & Air Hose, 3 Gallon Portable w/Accessory Kit (DC030098)

  • Versatile – the air compressor is ideal for quick and easy inflation of car tires, bikes tires, sports balls, air mattresses.
  • also great for cleaning your workbench area and lawn equipment.
  • User friendly design – easy to read gauges make for accurate pressure control while the oil free pump makes for maintenance free operation.
  • Portable – weighing 20 pounds, The unit is easy to carry around from job to job.
  • Accessory Kit Included - 25 ft. Recoil air hose, blow gun, (2) inflation needles, OSHA safety blow gun tip, (2) 1/4 in. Industrial plug (m), 1/4 in. Industrial coupler, PTFE thread sealant tape, aluminum tapered nozzle, & tire chuck.
  • 0.7 CFM @ 40 PSI and 0.4 CFM @ 90 PSI. 125 maximum PSI.
Check Stock

Capri Tools - CP21350 Windstorm EX High Performance Air Blow Gun with Adjustable Air Flow and Extended Nozzle

  • High performance air blow gun delivers powerful air flow up to 2x at 72 CFM, giving you efficient coverage over large work areas.
  • Osha compliant venture nozzle delivers exceptional air flow while meeting OSHA's output pressure safety standards.
  • Control the air flow level by turning the flow control knob conveniently located above the handle.
  • Constructed with durable aluminum body with premium matte finish. Easy to operate with ergonomic contour Soft grip and heavy-duty trigger.
  • Includes (1) venturi turbo nozzle (1) 4. 5 in. Nozzle extension for a combined 6. 5 in. Nozzle length for those hard to reach areas and (1) 1/4 in.....
Check Stock

Selkie Pressure Washer Sandblasting Kit - Wet Abrasive Sandblaster Attachment, with Replacement Nozzle Tips,Protect Glasses, 1/4 Inch Quick Disconnect, 5000 PSI

  • ...raditional sandblaster. Easily prepare and clean stubborn materials from any type of irregular surface..
  • ⚒ 【SPECIFICATIONS】: The sand blasting gun features a goggle, 10 feet hose, 16 inch pressure washer wand (water input), 17 inch sand wand (sand input), four hose clamps and extra two replacement ceramic nozzle kits..
  • ✨ 【IDEAL SANDBLASTING GUN】: These kits are easy-to-use, Quick Connect Inlet to Gun，Individual Replacement Parts Available，Max Pressure Rating 5000 PSI，Max Flow Rating 8 GPM3000 PSI @ 4 GPM or Greater，Temperature is up to 140ºF/60ºC，stable characteristics..
  • ⚒ 【VARIETY OF APPLICATIONS】: Designed to blow dust, water, and cleaning abrasives to remove rust, paint, scale, and other stubborn materials from various surfaces.
  • Clean off your machinery and engine compartments or clear your driveway and barn doors of debris with one of these sand blasting guns..
  • ✨ 【BUILT TO LAST】: Built for durability, strength, and longevity, this portable sand blaster gun kit is made of premium materials that prevent rust and corrosion.
  • The chrome plated gun is durable and is compatible with the copper nozzle fittings and pick-up tube.
  • A small 1/4-inch NPT inlet connects to the heavy-duty rubber hose.
Check Stock

Selkie Pressure Washer Sandblasting Kits - Wet Abrasive Sandblaster Attachment, with Replacement Nozzle Tips,Protect Glasses, 1/4 Inch Quick Disconnect, 5000 PSI

  • ...raditional sandblaster. Easily prepare and clean stubborn materials from any type of irregular surface..
  • ⚒ 【SPECIFICATIONS】: The sand blasting gun features a goggle, 10 feet hose, 16 inch pressure washer wand (water input), 17 inch sand wand (sand input), four hose clamps and extra two replacement ceramic nozzle kits..
  • ✨ 【IDEAL SANDBLASTING GUN】: These kits are easy-to-use, Quick Connect Inlet to Gun，Individual Replacement Parts Available，Max Pressure Rating 5000 PSI，Max Flow Rating 8 GPM3000 PSI @ 4 GPM or Greater，Temperature is up to 140ºF/60ºC，stable characteristics..
  • ⚒ 【VARIETY OF APPLICATIONS】: Designed to blow dust, water, and cleaning abrasives to remove rust, paint, scale, and other stubborn materials from various surfaces.
  • Clean off your machinery and engine compartments or clear your driveway and barn doors of debris with one of these sand blasting guns..
  • ✨ 【BUILT TO LAST】: Built for durability, strength, and longevity, this portable sand blaster gun kit is made of premium materials that prevent rust and corrosion.
  • The chrome plated gun is durable and is compatible with the copper nozzle fittings and pick-up tube.
  • A small 1/4-inch NPT inlet connects to the heavy-duty rubber hose.
Check Stock

Capri Tools Air Blow Gun (2-Way Air Blow Gun)

  • Blow stubborn debris, dust, water, and more off of all kinds of materials and machinery with this powerful air blow gun with 150 maximum PSI.
  • Control the air flow by turning the flow control knob conveniently located above the handle.
  • Get to hard to reach areas with the extra-long 4.5 in. nozzle.
  • Constructed with heavy-duty components and a solid, attractive aluminum frame, and comes equipped with an ergonomic contour soft grip.
  • 2-way 1/4 in. NPT air inlet lets you to connect the air hose from either top or bottom to suit your needs. A 1/4 in. NPT quick connector is included.
Check Stock