Reviews Black Marine Paint

Vallejo Oily Steel Paint, 17ml

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
ideal for fiberglass, wood and steel boats in salt water and fresh water.
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
Roller - 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
for use on boat bottoms & hulls below waterline only.

Check Stock

How To Paint Your Fiberglass Boat

...ng wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
Roller - 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
for use on boat bottoms & hulls below waterline only.

Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and....
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.

Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and....
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.

Check Stock

DURALUX Marine Enamel, White, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..

Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..

Check Stock

Interlux YBA068A/16 Trilux 33 Aerosol Antifouling Paint - White, 16 oz.

HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
haul and relaunch without losing the effectiveness of the biocide.
EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
for rolling, use a 3/16” nap or foam solvent-safe roller cover.
if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
after applying, there’s no maximum dry time before launch.

Check Stock

TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
ideal for fiberglass, wood and steel boats in salt water and fresh water.
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush – natural bristle.
Roller – 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
for use on boat bottoms & hulls below waterline only.

Check Stock

TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
ideal for fiberglass, wood and steel boats in salt water and fresh water.
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
Roller - 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
for use on boat bottoms & hulls below waterline only.

Check Stock