Reviews Black Annealed Steel Strip

Stainless Steel Continuous Hinge with Hole, Bright Annealed Finish (2 Feet, 2 Inches)

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.
Stainless steel 304 is corrosion resistant up to 1,500 degrees F, weldable, and stronger than steel and aluminum.
Bright annealed finish for additional protection against corrosion and a polished, mirror like appearance.

Fry pans in black steel plate for all hob types, including induction.
Can be "seasoned" for non stick use and prolonged life.
High quality, extra strong steel strip handle.
Please note the Black Steel Pans need to be seasoned before use with medium heat. If the pan is not season correctly the pan will not preform the way....

Model: COB-1575-WIRE-4-KIT MPN: Does Not Apply.
WIRE KIT COMES WITH: 10 FT OF #4 awg Black Welding Cable 10 FT OF #4 awg RED Welding Cable 8 Ft OF #6 awg Black Welding Cable.
Features: Temperature Rating -50° C to 105° C Ethylene Propylene Rubber (EPR) Annealed stranded bare copper per ASTM B-172 Ozone, sun, weather,.
Country/Region of Manufacture: United States Brand: AC/DC WIRE AND SUPPLY.

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.
Stainless steel 304 is corrosion resistant up to 1,500 degrees F, weldable, and stronger than steel and aluminum.
Bright annealed finish for additional protection against corrosion and a polished, mirror like appearance.

FUNTION - Protect the wheel well from mud, scratches and other external damage.For aesthetic purpose, you can improve appearance and styling dramatically..
Rubber Strip -The extra rubber strip can make the product more fit perfect and protect the body paint from damage..
HEAVY DUTY CONSTRUCTION - Made of 1/8" steel sheet and 1 1/4" X 0.08" wall steel tubing. Textured black powder coat finish for corrosion protection and durability..
APPLICATION - 2007-2018 Wrangler JK all models..
INSTALLATION - Easy bolt-on installation. Slight drilling requried for rear fender flare..