Reviews Bilge Pump Alarms
Attwood 4650-7 Tsunami T800 Aerator Pump 800 GPH 12-Volt 3 ½-Inch Long Inlet Threaded ¾-Inch Diameter Outlet 29-Inch Wire
- Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
- Reliable, self-contained unit that locks securely into the pump.
- Installs easily, fits properly, and delivers outstanding performance.
- Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
- 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stockcreatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump
- 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
- 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
- Turn pump off when water level reaches 3/4″(19mm)..
- 【Performance】:Long life, switching frequency up to 10 million times.
- Ultrasonic welding, forming a seal, reliable and secure, not leaking..
- 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
- 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check StockBilge Float Switch, Huazu Automatic Bilge Pump Float Switch Rule Float Switch DC 12V 24V 32V for Boats Ignition Protected Mercury Free
- DURABLE: The shell of bilge pump float switch is made of high-quality ABS material, which has high strength and durability, and the internal metal contacts ensure reliable start/stop. The switch can be removed from the base for easy cleaning and servicing..
- USE WITH PUMPS: The bilge float switch is automatic and can be connected to various submersible pumps, bilge pumps, and water pumps. Turn the pump on when the water level reaches 2″ (51mm) and turn off the pump when the water level reaches 3/4″ (19mm)..
- PERFORMANCE: The switching frequency is up to 10 million times, which can be used for a long time.
- ultrasonic welding forms a seal, reliable and safe, not leaking..
- SPECIFICATION: Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
- WIDE APPLICATION: This automatic float switch can be widely used in fishing boats, cruisers, runabouts, yachts, aquariums, small swimming pools, water reservoirs, fountains and other places that need drain the water..
Check StockWhale BP3000 Gusher 30 Manual Bilge Pump, On-Deck, up to 31 GPM Flow Rate, 1 ½-Inch Hose Connections, for Boats Over 40 Feet
- Proven manual bilge pump with a robust design to stand up to the most demanding marine environments and conditions.
- Designed for bilge or holding tank pump-out on a boat 40 feet long or longer.
- Rugged, corrosion-resistant Marine Grade LM6 alloy construction with a powder coat finish.
- High-capacity double acting pump that pumps on both the to and fro strokes.
Check StockRule 500 GPH 25SA Electronic Sensing Bilge Pump-500
- Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
- 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
- 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
- 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
- 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check StockOASIS MARINE Automatic Submersible Boat Bilge Water Pump Marine Plumbing 12v 750 GPH Automatic with Float Switch Built in 3/4 inch Hose Outlet
- 750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump.
- Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring.
- All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both.
Check StockDontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter:1 1/8\) (1100GPH)
- LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
- NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
- LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
- EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
- WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check StockZ care LVP Marine Boat Cleaner (3)
- I.D.: 1 1/8" or 28.6mm, length: 50' or 15.2M, Bend Radius: 1" or 25.4mm, VAC rating: 20, color: White.
- Note: Do not attach to thru hull fitting below the water line.
- Shields Bilge flex Hose is a single layer corrugated polyethylene hose.
- It is resistant to mild chemicals and salt water and there is a clamping cuff every foot.
- This hose is primarily used for bilge pump discharge.
Check StockManual Bilge Pump for Boats Kayak Canoe Hand Water Pump | Hand Pumps Siphon Pump Bailer Kayaking Boat with Hose Portable Held 20 Gallons Per Minute Suction Marine Grade Regular
- LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
- NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
- LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
- EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
- WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock