Reviews Bike Stand With Adjustable Clamp Force

Zoom Bike Suspension Seatpost Bicycle Seat Post Replacement Lightweight Aluminum Body Clamp Angle Adjustable Offset 14mm Black 27.2

  • ...ed On The Body ,Choose The Same Size As The Original One.(2) Measure The Inside Diameter Of The Frame Tube(Normally It Is Not Accurate, Considering Operator,Measuring Tool , Temperature,Etc.,).(3) Inquire The Bike Frame Seller To Get The Further Information.
  • ★How To Adjust And Install Suspension★ : Rebound Force Adjustable By Tighten Or Loose The Bottom Screw Wiht M6 Allen Wrench. Suspension Travel 42mm/ 1.65inch.Build-In Spring Coil And Damper Rubber Absorb The Vibration While Riding, The Seat Post Comfort Your Riding Experience, Improve The Shocks. Saddle Clamp Angle Can Adjust In -5 Degree To +18 Degree. 2 Bolts Hold The Clamp, Enhance Safe And Easy To Install.
  • ★Seat Tube Parameters★ :Material: 6061-T6 Alloy Aluminum , Diameter : 27.2mm Length: 350mm Travel: 40mm Adjustable Preload Suspension Travel. Offset :14mm .Weight: Approx 490g(1.08 Lbs) Damping:Coil Spring , You Can Add Seatpost Thim(27.2~28.6/30.0/30.4/30.8/30.9/31.6/33.9) To Fit Different Size.
  • ★Compatibility★ : Most Fixed Gear Bike ,Road Bike ,Mountain Bike , Universal Bikes,Etc. Support Weight 50kg/ 110lbs To 100kg/ 220lbs(Clockwise The Bottom Screw If You Are Heavy, Anticlockwise It If You Are Lightweight).
  • ★Warranty:★ :We Are Confident To The Product Quality And Offer 2 Ye....
Check Stock

Unisky Bike Repair Stand Wall Mount Bicycle Maintenance Workstand Foldable Rack with Rotating Head

  • 360 DEGREE ROTATING: With the quick-release handle and the turning button, the clamp head rotates in 360 degree, easy for you to reach every part of....
  • STEADY AND STABLE: This desk-mount repair stand is firmer and more stable than normal floor one. By stabilizing and mounting in surface, it can help....
  • DURABLE AND STRONG: The teeth and clamp of the bike repair stand are well made and heavy duty. The maximum weight capacity of the bike maintenance....
  • SUITABLE FOR ANY FLAT SURFACE: You can mount this bike repair stand to any flat surface. Then dealing with bicycle maintenance works becomes....
  • SIZE INFO: The total height is about 23.62”, from the bottom to the upper part of the clamp. The width is about 19.69”, from the front part of....
Check Stock

unisky Bike Trainer Stand Indoor Exercise Magnetic Bicycle Training Stand and Maintenance Home Shop Bicycle Repair Stand Height Degree Adjustable Cycle Maintenance Rack

  • DOUBLE LOCK SYSTEM: The two knobs on the left and right of the stationary bike trainer construct the dual locking system, making it easily to lock....
  • STEADY, STABLE AND FIRM: The indoor exercise bike trainer is designed with dual-support structure. The wide frame and front wheel riser block keep it....
  • COMPATIBLE WITH BIKES: The Unisky indoor bike trainer stand fits any road or mountain bike with a 26-28" or 700c wheel. There is no need to buy a new....
  • HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike....
  • 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the....
Check Stock

Unisky Bike Trainer Stand with Foldable Bike Repair Stand

  • QUICK RELEASE: The handle at the stationary bike trainer not only can release the bike off the trainer quickly by lifting up, but also can lock the....
  • 6 SPEED RESISTANCE: With a remote controller of 6-level speed by a wire, you can change resistance to comply with the cycling conditions you want and....
  • STEADY, STABLE AND FIRM: The indoor exercise bike trainer is designed with dual-support structure. The wide frame and front wheel riser block included....
  • HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike....
  • 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the....
Check Stock

Bike Trainer Magnetic Bicycle Stationary Stand for Indoor Exercise Riding 26-29 & 700C Wheels Quick Release Skewer & Front Wheel Riser Block Included

  • ... training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds. In addition, any bicycle with a wheel diameter of 26 ''to 29'' including 700c can be fitted to our stand..
  • 【6 Level Resistance Adjustable】: The trainer includes a drive-by-wire device so that you can change the resistance from your handle bars directly. You can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed..
  • 【Smooth & Low Noise Operation】: There is almost no sound on the wheels on the riding platform. It is recommended to replace smooth tires during cycling training to reduce vibration, reduce indoor resonance or add carpet under the stage. In some cases it will be loud with MTB tires. If you owned a MTB with rough tires, careful to buy. Because MTB tires will be loud with all bike trainers, no matter how expensive it is..
  • 【Portable Folding Bike Exercise Stand】: In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the conta....
Check Stock

Bike Trainer, Magnetic Bicycle Stationary Stand for Indoor Exercise Riding, 26-29" & 700C Wheels, Quick Release Skewer & Front Wheel Riser Block Included

  • ...s the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds. In addition, any bicycle with a wheel diameter of 26 ''to 29'' including 700c can be fitted to our stand..
  • 【6 Level Resistance Adjustable】: The trainer includes a drive-by-wire device so that you can change the resistance from your handle bars directly. You can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed..
  • 【Smooth & Low Noise Operation】: There is almost no sound on the wheels on the riding platform. It is recommended to replace smooth tires during cycling training to reduce vibration, reduce indoor resonance or add carpet under the stage. In some cases it will be loud with MTB tires. If you owned a MTB with rough tires, careful to buy. Because MTB tires will be loud with all bike trainers, no matter how expensive it is..
  • 【Portable Folding Bike Exercise Stand】: In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just tak....
Check Stock

Gioventù E Bike Repair Stand Bicycle Stand Max 110lbs - Bike Stand for Maintenance with Super-strong Tube Heavy Duty Mechanics Workstand for E-bikes Mountain Bikes and Road Bikes

  • [Super-strong 6070 Aluminum Frame]: This bike repair stand is made with sturdy rust-proof 6070 aluminum and features a 1.78”-diameter bigger tube for additional stiffness. The maximum load is 110 lbs which means it’s able to hold up any fat bikes as well as most e-bikes..
  • [Upgraded Micro-adjustable Clamp]: The micro-adjustable clamp can rotate 360 degrees and fits 1” to 3” diameter tubes and seat posts of any shape, allowing the bike to sit at any angle by clamping on the frame tubes or seatposts, and it is rubber-coated so no worries about scratches..
  • [Easy Handling]: The height, tilt, and angle are all adjusted conveniently via quick-release levers for easy setup and breakdown. The stand is height adjustable between 47” and 67” gives you more flexibility to complete the necessary repairs..
  • [User Friendly]: A handy magnetic tool plate is included for keeping track of tools and small parts. Weighing a light 12.5lbs, it folds quickly, easily and compactly for storage (39”x8”)..
  • [Warranty]: All bike stands are precision-manufactured and undergo a professional test before leaving the factory. We also offer 2 years factory warranty, if you have any problems, please feel free to contact us..
Check Stock

UNISKY Bike Repair Stand (Max 66LBS) Foldable Bike Stand for Maintenance Portable Height Adjustable Rack with Quick Release Bicycle Mechanics Maintenance Workstand

  • * HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike repair workstation eases your work because you only need to bend over when it is very necessary..
  • * 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the bike’s finish. The rod with adjustable handlebar stabilizes the front wheel. Both facilitate your work when repairing..
  • * CONVENIENT TOOL PLATE WITH MAGNET: A complementary magnetic tool tray is included in the package of the bike repair rack. After installation, the tool tray is very useful to put all the tools you need when repairing. By the magnet and the different partition of different sizes, you can keep tools organized..
  • * PORTABLE & FOLDABLE: The telescoping tubes and foldable legs makes it easy to fold and transport. You can put this portable bike repair stand in your car for a race or put it in a corner of the house, very space-saving. When you need to use it, it is convenient to assemble and set up..
  • * DURABLE & STRONG: Due to heavy duty construction, the bike maintenance rack supports bike up to 66lb with round crossbar ranging from 1”-1.57”, holdi....
Check Stock

CXWXC Bike Repair Stand – E Bike Stand for Maintenance Workstand – Ebike Repair Stand Shop Home Mechanics for Mountain Bike and Road Bike

  • ...lease collars and closures that help ensure stability within its 44.45″-66.45″ height adjustment range..
  • 【Universal Convenience】: Able to support bikes up to 66lbs with tubes ranging from 25-45 mm, this bicycle stand will hold your road or mountain bikes with stability and ease. Thanks to a 44.45″-66.45″ adjustable height and 360-degree rotating clamp, you’ll be able to get to work while standing up or sitting down, and don’t need to bend over backwards, causing aches and strains..
  • 【Tool Tray & 3 Stable Legs】: Plastic tool tray with built-in magnetic compartment is lightweight and durable that delivers easy access to tools, lubricants, spare components, and accessories during tune-ups or bike washing sessions. The 3-leg structure with anti-slip rubber bottoms keeps the stand stable at all times..
Check Stock