Reviews Bevel Gear Valve

Boston Gear HL148Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375\ Bore, 16 Pitch, 12 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth

12 teeth for use with HL148Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion.

Bevel Gear 1.5 Mod 1:2 (15T/30T) 2Pcs Set.
Notice: these bevel gears have no set screw holes, you need to reprocess it by your own if you need..
Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.

Bundle includes 2 Items: (1) Lesco 101186 High Wheel Walk-Behind Spreader with (1) Gearbox Repair Kit.
Lesco Gear Repair Kit includes 1 x Seal (# 030384), 1 x Gear Cap (# 030593), 1 x Bevel Gear (# 030594), 1 x Pinion Gear (# 030595), 1 x Roll Pin (# 060019), 1 x Roll Pin (# 060022), 2 x Seals (# 030385).

【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
【Good quality and durable】High wear resistance, high strength and high rigidity.
【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.

...th technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance.
Make quick, one-handed adjustments using large, rubberized levers.
Better fit and more control with comfortable rubber grip on handle.
Large cutting capacity (2-3/8″” at 90°) and bevel capacity (0°-51.5°) with positive stops at 22.5°and 45°.
Settings are easy to read with oversized number and ruler markings.
Blade wrench is attached to saw for fast and convenient blade changing.
Large bevel capacity with positive stops at 22.5 degrees, 45 degrees, and 51.5 degrees..
Oil-bath technology is created with a built-in fan and sealed-gear housing to ensure 100% oil surface coating.
High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears.
Reinforced power cord withstands jobsite abuse.

[❓Q: My unit is missing the hose?❓] A: NO,Unique design: Hidden Schrader Valve Hose, Equipped with Schrader Valve is Hidden Inside The Air Pump and Needs to be Pulled out.
Portable Mini Bike Pump: The size of this Automatic Bike Pump is 6.38*2.4*2.4 inches, which is light and easy to carry. The top is designed with LED lights. The storage bag can be installed on the bicycle, which is very convenient for outdoor use. And equipped with Schrader valve, Presta valve, Inflating needle for balls and nozzle for swimming ring.(Note: Equipped with Schrader valve is hidden inside the air pump and needs to be pulled out).
Multifunctional application: 4 unit values are available: PSI, BAR, KPA, Kg/cm², the maximum pressure value is 150PSI, suitable for motorcycles, bicycles, balls, cars, swimming ring and other inflatable products. It has 2 built-in 2500mAh rechargeable batteries to meet your emergency inflation needs..
Intelligent interactive interface and large LCD screen: Built-in high-precision air pressure sensor, 5 kinds of air pressure setting operation interface (ball gear, bicycle gear, motorcycle gear, car gear, custom g....

The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy toy cars/robots/motors..
Axle length of 30mm, 50mm, 70mm, 100mm, shaft diameter is 2mm, 2pcs / kind, for a total of 8 Pcs.
Five wheel wheels: outer diameter 30mm, inner hole 2mmfor a total of 4 Pcs.
The characteristics of gear: 36MM yellow 2mm hole belt wheel, rack, four-wheel drive, 28 tooth 2mm hole Fan teeth and 30-100mm gear axle, five wheel wheel diameter 30mm!Multi-uses, you can use it to fix the toys,Great for diy science and small production, product design and mechanical model..
Most gear is 2mm aperture (tight or loose), in addition to one 81.5A spindle hole is 1.5mm, there are 2 crown is 2.5mm, there are 1 crown gear C303A is 3mm, one 15 teeth 2.3mm hole and 3.17mm hole..

VARIETY OF GEARS, This 78 pcs gear package includes: axles, tires, gears, bushings, rack, etc, so basically buy back can always be used. Enough for you to choose and durable for use..
MORE COMPREHENSIVE THINGS , spindle, single, double, crown gear, pulley, rack, bevel gear, copper gear, axle, axles, tires, rubber bands and so on..
USED FOR DIY, The gears set is good accessories for your toy car , robot and so on, Easy to change when the gear is missing or damaged, as a spare accessory to use..
MADE OF HIGH QUALITY PLASTIC, wearable and long service life. Small parts, easy to use..
SATISFACTION GUARANTEE, We care for every customers feeling.If this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked..

Made of high quality 45# steel ,high wear-resistance,longtime use..
Lower contact ratio between gears, higher load capacity..
It only can fit for 2module gear,20 teeth,90 degrees,Hole Dia 14mm..
Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).