Reviews Bevel Gear Lube

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
PNEUMATIC TOOL OIL: This oil is recommended for lubricating pneumatic equipment and tools like impact wrenches, air ratchets, sanders, grinders, air motors, hammers, and drills. .
INCREASES TOOLS LIFESPAN: Our anti-corrosive tool oil contains solvents that break down deposits, while the oil lubricates the tool. Preventing rust and corrosion results in an extended lifespan of the tools. .
ENHANCES PERFORMANCE: Specially formulated with rust inhibitors, our Sta-Lube Air Tool Oil maximizes your tool's performance. .
PRODUCT SPECIFICATIONS: Sta-Lube Air Tool Oil Lubricant is available in a 1 gallon or 3.785 L bottle, and is made in the USA..

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Contains all parts needed to WINTERIZE your Yamaha 2006+ F75 F90 F115 Outboard.
Includes Yamaha Oil Change kit, Lower Unit Gear case lube, necessary gaskets, and Gear Lube Pump.
Keep your Outboard protected with Yamalube Yamashield Rust & Corrosion Protectant.
Yamalube Stor-Rite Engine Fogging Oil is included to ensure your cylinders are fogged to prevent rust.
Yamaha MAR-MINIF-IL-TR / MAR-M10EL-00-00 Mini-10 Fuel/Water Separator Filter & 6D8-WS24A-00-00 Primary Fuel Filter is included.

Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
Pieces 75, ideal for DIY science and small production, product design and mechanical model.
19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.

STA-LUBE: Sta-Lube offers a range of high performance greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Highly efficient products have been rigorously tested to meet the highest quality standards..
HYPOID GEAR OIL: GL-4 Hypoid Gear Oil has low pour points and high temp properties to provide lubrication over a wide temp range. Our formula contains anti-rust and anti-wear EP additives to provide corrosion protection in drives and hypoid gears..
MULTI-PURPOSE: Our formula is not corrosive to copper, bronze, or other non-ferrous alloy bearings and bushings..
APPLICATIONS: This multi-purpose oil is suitable in use for auto, truck, and bus standard transmissions, and differentials requiring API/GL-3 and GL-4 oils that are 85w90 grade. Safe for use on yellow metals..
PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..

STA-LUBE: Sta-Lube offers a range of high performance greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Highly efficient products have been rigorously tested to meet the highest quality standards..
ENGINE ASSEMBLY LUBRICANT: Effectively lubricates engine parts for assembly to ensure anti-seizure and prevent friction and wear on first start for all types of engines..
FORMULA: This engine lube is a lithium 12 hydroxyl stearate based grease that is easily applied to metal surfaces to reduce contact friction, galling, and wear..
EXCELLENT PERFORMANCE: Our high performance anti-seize lube prevents destructive metal-to-metal contact on newly assembled engine start ups and break in periods..
PRODUCT SPECIFICATIONS: This lubricant is available in a 2.75 oz tube..