Reviews Belden Cable

Blue Jeans Cable LC-1 Double-Shielded Low Capacitance Subwoofer Cable, 20 Foot, Black

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Assembled in our shop in Seattle, WA by American workers.
Heavy double-braid bare copper shielding provides the best protection available against induced low-frequency noise and hum.
Bulk cable stock manufactured to our specifications in Richmond, Indiana by Belden, the world leader in communications cabling.
Rated CM (superior to CL2, CL3) for in-wall installation.
available both in white and black jacket.
Taversoe crimp RCA plugs offer tight grip through spring contact tension, ensuring solid connection without the danger of jack damage..

Perfect For: Coaxial wire stripping tool (Prep Tool), and cutter gives users an easy and cost-effective way to cut and strip wire and coaxial cables, category cables (phone/network), or prep ends for installing compression connectors.
Ergonomic Design: Cable stripping tool is constructed from sturdy, yet lightweight yellow plastic and features a safe (accident free) center blade to cut through any Cable depth.
Features: A spring loaded Cable cutter with an adjustable stripping blade for versatility.
Perfect For: Coax coaxial cutter works on an RG6/ RG59/ RG7/ RG11, plus strips outer jacket of UTP, STP Cable and CAT5 round telephone Cable , works exceptionally well with most compression connectors including, Digicon, Perfect Vision (PV), Klein, Gilbert, Holland, Lock and Seal, PPC (both short and long XL), Belden, Snap and Seal, Thomas and Betts, Stirling, and many, many more.
Quality Assurance: UL Listed and Includes a US manufacturer’s warranty.

3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
Handle all Pathological patterns, fully digital non-compression broadcast level transmission.

1.standard Ratchet crimper tools for RF connector.
2.Crimp tool 0.429" (10.90mm) for all 400 type cables (LMR 400, CA-400, CNT-400, SC400 etc).
3.Hex Die with 0.429" (10.90mm) ,0.128" (3.25mm) and 0.100" (2.54mm) cavities4..
4.Works with LMR400 (and other 400-style) cable, as well as RG8, RG9 ,Belden 9913 cable and RG213，RG214 and RG174,RG316.
5.Ratcheting mechanism ensures quality crimps,fixed Jaw Terminal Crimper.

TOP DIY SOLUTION: Ideal for build or repair coaxial cables,use this connector to create your own UHF cable which is widely used in Wireless Communications Systems,Short Antenna Feeder runs or any other application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,SCADA, Mobile Antennas)..
REDUCER INCLUDED: Work with 50ohm low loss RF cable RG-8,RG-213,Belden 9913.If your cable is RG-8X Mini-8 RG-59 LMR240 Type,then use UG-176 Reducers to fix the cable.(UG-176 reducer is included in the package).
OUTSTANDING PERFORMANCE: High quality brass, nickle plated body, gold plated contacts and sleeve good for better conductivity and easier soldering. Insulator PTFE(Teflon), withstand high temperature when soldering and will not Melt..
TRANSFER FAST: Gold-plated Contacts to ensure optimum signal transfer.
10-PACK: Come with 10-Pack, which can save you much and makes you always have a backup..

[Specification] - BNC male crimp connectors for rg8x/lmr240 coax cable| Impedance: 50 Ohm | Operating frequency: 0-1000MHz..
[Low Loss ] - The attenuates signal of this bnc crimp connector is less than 0.1db. at 500MHZ VSWR< 1.15. It can be combined with lmr240/rg8x coaxial....
[Well Made] - This lmr240 bnc male connector is made of brass gold-plated pins and Teflon insulators，which has good signal transmission....
[Compatibility]- This bnc male crimp connector works great for RG8X, LMR240,KMR240,4D-FB,belden9258,CNT240,Mini8 low loss coaxial cable or similar rf....
[Application] -BNC male connectors suitable for CB-ham radios, CB radios, two-way radios, bnc receiver antennas, antenna extension, radio scanner,....

SOLIDLY BUILT: 400 n connector.made of copper for increased corrosion protection.pin brass gold plated..
DURABILITY: ≥ 1000cycles have a reliable signal every time..
PREVENT FALLING OFF: the center pin you need to 5/8" open end wrenches to screw it together. With lengthened and thickened rubber-filled heat shrinkable tube. Can better prevent falling off..
LOW LOSS LOW SWR--n male connector lmr400 attenuates signal only 0.1db,swr≤1.15(0-6gmhz) . fit with rg8 n male connector.work with the 50ohm low loss rf cable: lmr400/belden 9913/cnt400/rg8 and connected with any brand n female connector..
As a professional manufacturer of coaxial connectors.each product is 100% tested and accurately inspected..