Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2
- LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
- Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
- Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
- The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
- These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check StockAll Balls 22-1039 Steering Bearing Kit
- Specs: Crank Shaft Bearing Kit , 2 Seals, 2 Tapered Bearings.
- Kits contain upper and lower tapered bearing sets (cup & cone) along with specially designed seals tkeep water and dirt out and grease in.
- Compatible With/Replacement For: Aprilia Caponord 1200 2014-2017, EVT Caponord 2001-2007, RST 1000 Futura 2001-2004, RSV Mille 2000-2003, RSV Tuono 2002-2005, RSV4 APRC R 2009-2015, RSV4 FACTORY 2009-2015, RSV4 RF 2016-2018, RSV4 RR 2016-2017, RSVR 2004-2008, SL 1000 Falco 2000-2003, Tuono 1000 R 2006-2015, Tuono 1100 V4 2016-2018, Tuono 1100 V4 RR 2016-2018, Ducati 1098 2007-2008, 1098 R 2008, 1098 R Bayliss 2009, 1098 S 2007-2008, 1098 S Tricolore 2007-2008, 1198 2009-2010, 1198 R 2010.
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
- 100% New aftermarket Crank Shaft Bearing Kit built to meet OEM specifications.
Check StockM-parts 99-550KITB Trailer Drum Kits 5 on 5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle Set 1 Right and 1 Left
- M-parts 99-550KITB Trailer Drum Kits 5 on 5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle Set 1 Right and 1 Left.
- 5 on 5” bolt pattern brake drum with 1/2”-20 studs and bearing races installed.
- 10” x 2-1/4” electric brakes (mounting hardware included).
- L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension).
- Grease seal - (56" O.D - 1.72" I.D)/ EZ Lube Dust cap - (1.98" outside dimension)/ Lug nuts (1/2”-20)/ Cotter Pin.
Check StockREPLACEMENTKITS.COM - Brand fits Yamaha® Clutch Crankcase Outer Cover Gasket Bearing & Seal Kit for 550 & 700 Rhino Grizzly & Viking -
- Yamaha Clutch / Crankcase Outer Cover Gasket, Bearing & Seal Kit for 550 & 700 Rhino, Grizzly & Viking.
- Replaces 3B4-15463-00-00, 93306-20120-00 (Bearing) & 93101-12168-00 (Oil Seal).
- Gasket is Made in the USA & Coated on 2 sides.
Check StockJDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K
- Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
- Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
- Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
- Note: This hub fit straight spindles, not for tapered spindles.
Check StockM-parts 99-555KITB Trailer Drum Kits 5 on 5.5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle Set 1 Right and 1 Left
- M-parts 99-555KITB Trailer Drum Kits 5 on 5.5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle Set 1 Right and 1 Left.
- 5 on 5.5” bolt pattern brake drum with 1/2”-20 studs and bearing races installed.
- 10” x 2-1/4” electric brakes (mounting hardware included).
- L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension).
- Grease seal - (56" O.D - 1.72" I.D)/ EZ Lube Dust cap - (1.98" outside dimension)/ Lug nuts (1/2”-20)/ Cotter Pin.
Check StockLIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K
- Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
- Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
- Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
- pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock2 DTA Front Wheel Hub Wheel Bearing Repair Kits Left Right Compatible with 2006-2013 Mazda 3, Mazda 5. Replaces Dorman 930-003, Timken 510096
- 2 Front Wheel Hub and Bearing Kits Compatible with 2006-2013 Mazda 3, Mazda 5..
- NOTE: One side of bearing with magnetic ABS tone ring, that side needs pressed inside knuckle facing the ABS sensor.
Check StockLIBRA New 12\ x 2\ Trailer Hydraulic Free Backing Marine Brake Assembly Pair Set - 21020
- SPECIFICATIONS - M-Parts Trailer Drum Kits 5 on 4.5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle.
- BOLT PATTERN - 5 on 4.5” with 10” x 2-1/4”.
- HARDWARE - Lug nuts (1/2”-20)/ Cotter Pin, L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension), Grease seal - (56" O.D - 1.72" I.D)/ EZ Lube Dust cap - (1.98" outside dimension).
- M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock