Reviews Bearing Housing Water Cooled

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine 2.2KW

  • Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm).
  • ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision....
  • Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the....
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water....
  • Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version....
Check Stock

Sealmaster NP-24 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/2" Bore, 1-15/16" Base to Center Height, 5-3/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

HX35 Turbo Lab America Holset Cummins HY35 HX40 HE341 HE351 Turbo Rebuild Kit

  • For HY35, HX35, HX40, HE341, HE351, HE351CW.
  • Compressor Housing O-ring (Bearing Housing Must be Machined).
Check Stock

Sealmaster NP-20R Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/4" Bore, 1-11/16" Base to Center Height, 4-3/4" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

maXpeedingrods TD05 Turbocharger for Subaru Impreza WRX STI EJ20 EJ25 2002-2006, Water + Oil Cooling TD05-20G Turbo Charger

  • 【Fitment 】: Compatible for Subaru IMPREZA WRX / STI EJ20 EJ25 engine 2002 - 2006. Cost-efficient replacement turbo can boost horsepower up to 420BHP.
  • 【Upgrade Version】: TD05-20G Turbo replaces the TD04 for a TD05H turbine wheel, enlarges the turbine housing area to 7 square cm to improve the exhaust efficiency, thus gain more power than the stock turbo.
  • 【Notice】: All for WRX Wagon engines and automatic sedan engines came with a TD04,all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required.
Check Stock

Samson Super Juicer - Model SB0850 - Commercial Wheatgrass Juice Extractor - Heavy Duty Stainless Steel Wheat Grass Juice Machine

  • Stainless Steel base and motor housing (make sure to remove the white protective plastic film on the motor housing before operating).
  • Processes up to 5 ounces per minute - grasses, herbs, sprouts and other greens.
  • Stomper included for quicker juicing of longer wheatgrass. Continuous pulp expulsion. An adjustable resistance screw optimizes juicing, but should not....
  • Heavy duty air cooled motor is circuit breaker protected and permanently lubricated.
  • Easy assembly and disassembly. Forward and reverse buttons.
Check Stock

Sealmaster MP-32 Pillow Block Ball Bearing, Non-Expansion Type, Medium-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 2" Bore, 2-1/2" Base to Center Height, 6-3/4" Bolt Hole Spacing Width, ±2 degrees Misalignment Angle

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock