Reviews Battery Holder Connector

XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery

  • 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
  • Thicken PCB copper foil, allow security using 35A charging current..
  • This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
  • Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check Stock

(Pack of 8)AA and AAA Battery Holders: 1Pc 1 AA Holder, 1Pc 2 AA Battery Holder, 1Pc 3 AA Holder, 1Pc 4 AA Battery Holder, 1Pc 1AAA Holder, 1Pc 2 AAA Battery Holder, 1Pc 3 AAA Holder, 1Pc 4 AAA Holder

  • Package includes 8 Types of AA and AAA Battery Holders: 1 aa battery holder, 2 aa battery holder, 3 aa battery holder, 4 aa battery holder, 1 aaa battery holder, 2 aaa battery holder, 3 aaa battery holder, 4 aaa battery holder.
  • AA Battery Holder Dimensions(L*W*H): 1 aa battery holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm.
  • 2 aa battery holder: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm.
  • 3 aa battery holder: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm.
  • 4 aa battery holder: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm.
  • AAA Battery Holder Dimensions(L*W*H): 1 aaa battery holder: 2.047" x 0.519" x 0.476"/5.20cm x 1.32cm x 1.21cm.
  • 2 aaa battery holder: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm.
  • 3 aaa battery holder: 2.039" x 1.276" x 0.575"/5.18cm x 3.62cm x 1.30cm.
  • 4 aaa battery holder: 2.091" x 1.976" x 0.484"/5.31cm x 5.02cm x 1.23cm.
  • Battery Holder Leads: all aa and aaa battery case holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AA and AAA Holder Weight: single aa battery holder: 0.141oz/4g.
Check Stock

Bulldog Smart Airsoft Battery Charger for 8.4v to 9.6v Ni-MH / Ni-CD [Compact]

  • Peak performance pack - Tenergy’s high performance batteries provide more playtime.
  • our 8.4V 3800mAh NiMH rechargeable battery made of 7 cells Sub C NiMH batteries..
  • Ideal AEG battery power – Tenergy 8.4V NiMH battery designed to fit M16, SR16, full stock AK series, and full stock MP5 series: G&P M16A1, KNIGHTS SR16, MP5 SD5, MK5A4, G3 SD1, M16VN, CA G3 SG1, G3 A3, FAMASF1, M1A1, ASSV, PSG1 and RC cars/planes with Standard Tamiya Connector. For upgraded and/or modified AEGs, we recommend finding connector and measuring the gun compartment for best fit..
  • Fast charge and lasting capacity - Tenergy's AEG battery features rapid charge up, long runtime, and compatibility with the Tenergy 6V-12V RC battery charger..
  • Battery pack configuration - Tenergy electric gun battery dimensions: 6.13" (length), 1.9" (width) and 1.0" (height). Weighs 15.2 oz..
  • Large Tamiya connector - The airsoft replacement battery pack with Tamiya battery pack connector, standard Tamiya female connector assembled with 16 G wire..
Check Stock

UpBright 5V AC/DC Adapter Compatible with Novatel Verizon Wireless MiFi 4510L 4620L 5510L 6620L 6620LE 2200 Jetpack 4G LTE Mobile Hotspot Netgear AC791L Ellipsis MHS700L MHS800L MHS815L MHS900L

  • First adjust the push plate to accommodate the size of your battery (battery not included).
  • The push plate can be pull down fit various size battery (up to 76mm) as shown in the picture.
  • Place the battery on the push plate and align the 2 adjustable connector pong with the battery -/+ (If you can not identify the -/+ on the battery, it is usually the first and last charge connector on the battery).
  • Simply plug the dock to a power oulet to start charging your battery..
  • Charge status indicator LED ( Red LED indicate charging, Green indicate idle).
  • If Red LED does not indicate, please properly adjust the 2 -/+ pongs connector with the battery -/+. If the battery have 3 or 4 charge connector, the -/+ are usually the first and last charge connector of the battery..
Check Stock

Single 1 AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires (5-Pack)

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 5Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

LAMPVPATH (Pack of 8) AA Battery Holder Bundle 2Pcs Single AA Battery Holder, 2Pcs 2X 1.5V AA Battery Holder with Leads, 2Pcs 3X 1.5V 3 AA Battery Holder with Wire, 2Pcs 4X 1.5V 6 Volt Battery Holder

  • Package includes 8Pcs and 4 types battery holder case boxes: (1) 1 aa battery holder,(2) 2 aa battery holde,(3) 3 aa battery holder,(4>)4x 1.5V 6 volt battery holder.
  • Dimensions of AA battery holder(L*W*H): (1)single aa battery holder with leads: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm (2)2 aa battery holder with leads: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm (3)3 aa battery holder with wires: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm (4)4aa battery holder with wires: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm.
  • DIY Extension: Join one 2 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 9V aa battery holder.
  • Join one 4 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 12V aa battery holder. so, 9Volt aa battery holder and 12Volt aa battery holder are also on your hands..
  • AA Battery Holder Wire Leads: all aa battery case holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Weight of One AA Battery Holder: (1)single aa battery holder: 0.141oz/4g (2) 2 aa battery holder: 0.247oz/7g (3)3 cell aa battery holder: 0.388oz/11g (4) 4 cell aa battery holder: 0.459oz/13g.
Check Stock

LAMPVPATH (Pack of 6) Single AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 6Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

LAMPVPATH (Pack of 4) AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads, AAA Battery Holder with Wires

  • Package includes 4Pcs aaa battery holder case box: 2 aaa battery holder, 2x 1.5V aaa battery holder with leads.
  • One 2xAAA Battery Holder Voltage Output: 3V, 2 x 1.5v aaa battery= 3v aaa battery holder.
  • Dimensions of Battery Holder for AAA: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm(L*W*H).
  • Weight of One 2 AAA Battery Holder with Leads: 0.176oz/5g.
  • Leads: all 2 aaa battery holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 2 X 1.5V 2 aaa battery holders with wires can get a 4-aaa 6v battery holder.
  • Join three 2 X 1.5V aaa battery holder 2 can get a 6-aaa 9V battery holder, Join four 2 X 1.5V aaa battery holder can get a 8-aaa 12V battery holder. So, 6Volt aaa battery holder, 9Volt aaa battery holder and 12Volt aaa battery holder are also on your hands..
Check Stock

LAMPVPATH (Pack of 12) AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads, AAA Battery Holder with Wires

  • Package includes 12Pcs aaa battery holder case box: 2 aaa battery holder, 2x 1.5V aaa battery holder with leads.
  • One 2xAAA Battery Holder Voltage Output: 3V, 2 x 1.5v aaa battery= 3v aaa battery holder.
  • Dimensions of Battery Holder for AAA: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm(L*W*H).
  • Weight of One 2 AAA Battery Holder with Leads: 0.176oz/5g.
  • Leads: all 2 aaa battery holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 2 X 1.5V 2 aaa battery holders with wires can get a 4-aaa 6v battery holder.
  • Join three 2 X 1.5V aaa battery holder 2 can get a 6-aaa 9V battery holder, Join four 2 X 1.5V aaa battery holder can get a 8-aaa 12V battery holder. So, 6Volt aaa battery holder, 9Volt aaa battery holder and 12Volt aaa battery holder are also on your hands..
Check Stock