Reviews Battery For Resmed Airsense 10

BiXPower BP100 X2 High Capacity (100Wh x 2 = 200Wh) Rechargeable Batteries Compatible with ResMed AirSense 10 CPAP Machine

  • ... capacity, small size, light weight BiXPower BP100 rechargeable batteries, ( each battery has 100Wh high capacity ,with small size : 180 x 110 x 22.5mm or 7.2" x 4.2" x 0.9" and light weight: 621g or 1.4 lb). With a special DC Special Cable. It is compatible with ResMed S10 Series CPAP machines such as AirStart 10, AirSense 10, and AirCurve 10.
  • It may provide maximum up to 1 ~ 3 nights of continuous run-time. However, actual battery running time may vary: Depending on CPAP Machine setting (such as CPAP pressure, breathing rate, optimal mask seal and whether humidifier, heated tubing and exhalation pressure relief disabled) and running environment, a CPAP machine may need as much as 90W power or as little as 10W power. So actual running time may vary a lot: from 2 hours to 18 hours..
  • The battery pack comes with Two BP100 batteries + One special cable compatible with ResMed + One Y25 Split cable + AC Charger. You may use each BP100 battery separately, or use two batteries together at same time. This battery (batteries) works with the following: AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed..
  • This battery is made with high quality Li-ion battery cells and is compatible with many devices that need 15V, 16V, 16.5V, 18V, 18.5V, 19V....
Check Stock

KFD DC Adapter Car Charger for Resmed S10 Series,ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine,90W Resmed S10 370001 37297 Rockpals 300W/500W Vehicle Power Supply Cord Cable Charger

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

IBERLS Power Cord for Resmed Airsense 10 S10 Series, Cpap DC Converter Supply Adapter Charger Cable for BiPAP Machine, 90W 12V Car Cords

  • [Compatible Products] This airsense 10 cigarette lighter compatible with resmed air sense s10 series cpap and bipap machines and bipap machines s10 370001.
  • resmed aircurve 10 series cpap and bipap machine: aircurve 10 s bilevel machine, aircurve 10 vauto bilevel machine with humidair humidifier, can be used in cars, buses, vans, trucks, boats, and humidifiers or a car home..
  • [Product Parameter] Replace Resmed Airsense S10 Car power cable Total length 2.4M. Input: 12V-24V 12A Max. Output: DC 24V 3.75A 90W..
  • [Safety Settings] Compatible with Resmed CPA car supply cord external equipped with green reminder light to facilitate positioning in the dark when charging.
  • Built-in safety fuse, when the device or charger is faulty, the fuse will automatically fuse, cut off the power supply, play the role of protecting the device, replace a new fuse tube (250V 16A) can be restored to normal work..
  • [Reliable quality] The replacement resmed vehicle adapter passes CE/FCC/RoHS certification, and all of our products are subjected to up to 4 hours of aging test before shipment to ensure safe and reliable operation when in use. It is designed with heat resistant and flame retardant materials. Protect your airsense 10 from short circuits, overvoltage, overcurrent, and ....
Check Stock

TAIFU Resmed Airsense 10 Supplies, CPAP Power Cord for ResMed Airsense 10 Power Supply 90W AirStart 10 CPAP BiPAP Machines & AirCurve 10 370001 37297 37207 Rockpals 300W/500W Airsense 10 DC Adapter

  • [Compatible Products] This airsense 10 cigarette lighter compatible with resmed air sense s10 series cpap and bipap machines and bipap machines s10 370001.
  • resmed aircurve 10 series cpap and bipap machine: aircurve 10 s bilevel machine, aircurve 10 vauto bilevel machine with humidair humidifier, can be used in cars, buses, vans, trucks, boats, and humidifiers or a car home..
  • [Product Parameter] Replace Resmed Airsense S10 Car power cable Total length 2.4M. Input: 12V-24V 12A Max. Output: DC 24V 3.75A 90W..
  • [Safety Settings] Compatible with Resmed CPA car supply cord external equipped with green reminder light to facilitate positioning in the dark when charging.
  • Built-in safety fuse, when the device or charger is faulty, the fuse will automatically fuse, cut off the power supply, play the role of protecting the device, replace a new fuse tube (250V 16A) can be restored to normal work..
  • [Reliable quality] The replacement resmed vehicle adapter passes CE/FCC/RoHS certification, and all of our products are subjected to up to 4 hours of aging test before shipment to ensure safe and reliable operation when in use. It is designed with heat resistant and flame retardant materials. Protect your airsense 10 from short circuits, overvoltage, overcurrent, and ....
Check Stock

LHXEQR Tubing Adapter for ResMed AirSense 10 and AirCurve 10 Series Machines, Compatible with So Clean Cleaner and Sanitizer Machines

  • Necessary Tubing Adapter for ResMed AirSense 10 and AirCurve 10 Series Machines.
  • Connects the ResMed AirSense 10 & AirCurve 10 to So Clean machines.
  • Compatible with all So Clean models machines.
  • Exclusive 30-Day Money Back Guarantee & 2-Year Manufacturer's Warranty.
Check Stock

BiXPower 12V to 24V Fan-Less Converter Compatible with ResMed AirSense 10 Series CPAP Machines - DM90S10

  • This BiXPower DC power adapter can convert 12V DC (Range 10V ~ 30V) power to 24V DC power with special configuration cable and a special connector that is compatible with ResMed Airsense 10 devices. This DC Converter works for AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed..
  • Features: Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm).
  • Acceptable Input Voltage: 10V ~ 30V DC -Output Voltage: 24V.
  • Maximum Output Power: 90W. -USB output: 5V , 2.4A.
  • Package Contents: 12V to 24V Power Converter x1.
  • Special Output Cable for ResMed S10 series x1.
Check Stock

Compatible with So Clean Cleaner and Sanitizer Machines,Tubing Adapter for ResMed AirSense 10 and AirCurve 10 Series Machines

  • Compatible with ResMed AirSense 10 and AirCurve 10 Series Machines..
  • Connects the ResMed AirSense 10 & AirCurve 10 to So Clean machines.
  • Compatible with all So Clean models machines.
  • We guarantee that you can return or replace it within 30 days and give a satisfactory reply within 24 hours..
Check Stock

VHBW CPAP Power Cord for Resmed Airsense 10 Power Supply, Fits for ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine, DC 12-24V Car Charger 24V 3.75A 90W Resmed Airsense 10 DC Adapter

  • The 24Volt power supply cable is great for plugging in your portable power station and charging your airsense 10. Please do not use it with a 12 volt power box..
  • These dc adapters for resmed airsense 10(DC plug size: 5.5x2.1mm) with 1 interchangeable connectors(DC 5.5 x 2.5mm). It is compatible with most 24V power station like Rockpals 300w/Talentcell PB120B1/ Aimtom300w/ Progeny 300w/EnginStar 350w etc..
  • This 24 V DC power cord is 3.3ft. You can use it for your Resmed Airsense 10 when camping or during power outages..
  • This DC charger cable was bent to test longer service life. ​Anti-interference magnetic ring can keep your device stable and running..
  • The airsense 10 dc converter replacement are only used for S10 (part number:37207). Please don’t use it with system one 60 series or Dreamstation series..
Check Stock

BiXPower BP90 X2 High Capacity 96 Wh x 2 = 192 Wh Power Pack Compatible with ResMed AirSense 10 CPAP Machine - BP90X2-S10

  • This package comes with Two BiXPower BP90 high capacity rechargeable battery power bank and a Y25 split dongle that can combine two batteries....
  • Battery Running Time: Depending on CPAP Machine setting (such as CPAP pressure, breathing rate, optimal mask seal and whether humidifier, heated....
  • Easy to carry. Light weight: each battery weighs only 1.4lb (or 620 g). Compact size: Single battery dimension: 186 x 114 x 22.5mm (7.5" x 4.5" x....
  • Batteries can be charged from 100V ~ 240V AC power source, or a 12V car cigarette socket. Batteries has built in charging controller, can charge from....
  • This battery pack is compatible with the following ResMed CPAP Machines: AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed. It....
Check Stock