Reviews Bar Tool Holder

Magnetic Knife Strips, 15 inch Multipurpose Magnetic Knife Holder, Knife Bar, Knife Rack, Knife Strip, Kitchen Utensil Holder, Tool Holder, Magnetic Tool Organizer

  • Modern Design Magnetic Knife Rack: The modern magnetic knife block not only serves as a knife holder, but can also be used as a tool holder for the office, Hang your knives on the wall - save valuable drawer space and provide more convenient access to your knives! Without friction better protection cutting tool.
  • Multipurpose: This kitchen utensil bar can be used as a knife holder, knife strip, knife stand, kitchen utensil holder, home organizer, art supplies organizer, and tool holder. It never rusts or loses its strong magnetic charge and is easy to clean. And make sure small children don't have access to your sharp knives.
  • 15 INCH / 38CM: This magnetic strip has an extended length that allows you to hold more knives than most knife blocks on the market, while being small enough to easily fit in many nooks and crannies of your kitchen wall mount.
  • Cleaner and Safer: Install the included screws and mount it on the wall. To clean with a damp, soft cloth. If necessary, wash with water and mild detergent or soap. Wipe dry with a clean cloth. Our well-designed magnetic knife holder makes your kitchen more tidy and safer.
  • 【Quality Service】12 months professional after-sales service. If you have any problems, please contact us. We will do our best to solve t....
Check Stock

Watch Tool Kit, 149 IN 1 Watch Link Removal Tool Kit, Watch Back Remover Tool, Watch Pin Removal Tool, Watch Battery Replacement Kit, UnaMela Watch Sizing Tool Kit with User Manual and Carrying Bag

  • ...battery replacement, replace waterproof ring, etc..
  • 【Adjust & Replace Watch Band】:Use spring bar tool to press the spring bar to easily remove and replace watch band. 108 pcs spring bar provided by watch band tool, suitable for 8-25mm width strap. Besides, 2 ways to adjust metal watch band length, use watch band holder fix watch band, hit the punch pin with hammer to push out link pin, or rotate the watch kit link reomver to put out band link pin. Whether home or office, use this watch band tool to complete your watchband related operations..
  • 【3 Types Watch Opener Tool】: The first case type is screw down back, which placed notches on surface, use 3-jaw watch case opener, insert into the notches to rotate and open watch, suitable for 20- 60mm diameter watch. The second case type is snap off case, has smooth surface but a little lip at edge, use case knife to pry the back off. The third case type is 4 screw back, use screwdriver with bit, Phillips (1.5, 1.8mm), Flathead (1.0, 1.2, 1.5mm), turn the screw to open the back case..
  • 【Quality Comes First】: We all know this is very important. The metal parts in the watch band tool kit are all made of alloy steel, rust-proof and wear-resistant, can be used for a long time. Key parts such as punch pin, ....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

ZAKCO PRO-19 Genuine Full Grain Black Leather Heavy Duty Multi Pockets Construction Rig Carpenters Tool Belt 2 Leather Pouches Tool Belt Framer’s Handyman Roofer’s Tool Belt & Tool Organizer

  • 100% Real genuine tanned premium grade full grain thick gauge blackleather. You will receive. 2 Pouches. 1 Belt. 1 Hammer Holder. 4 Loops for your....
  • 8 Piece. Multi pockets professional grade X-large framer’s tool rig, carpenter’s tool organizer, roofer’s leather tool belt, drywaller’s tool....
  • Space for every tool including deep pockets for nut & bolts, nail & screws, tape measure hanger, pencil holders, hammer holders, pry-bar holder and....
  • Detachable 52 inches long, 2¾ inches wide, double prong, roller, breathable foam padded 100% real leather belt included. (Fits 34 to 50 inches).
  • Professionally designed & stitched with nylon thread. Durability & quality promised to our buyers..
Check Stock

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

  • ♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
  • ♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • ♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
  • ♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Watch Repair Kit Eventronic Professional Watch Battery Replacement Tool Watch Link Removal Tool Watch Back Remover Tool Spring Bar Tool Set with Carrying Case

  • ⌚[Professional Watch Repair Kit] Eventronic watch repair tools have most of the tools you need to repair your watch. Watch case opener, watch band link remover tool, pin punch, hammer, pliers, spring bar removal tool, band holder, watch case holder, screwdriver, tweezers..
Check Stock

Emoly 2 Pack Adjustable Shower Head Holder Bathroom Vacuum Suction Cup Handheld Shower Head Holder Mounting Bracket Plastic Abs with Chrome Polished (Sliver)

  • ✅ FITS UNIVERSAL SLIDE BAR: This shower head bracket is a new high quality replacement part for a standard 18-25 mm diameter round shower rod. ★Pay Attention: Not fit for all shower head and shower slide bar, please check the size is right before buying..
  • ✅ 360-degree rotation: The bracket supports 360 degrees of rotation, so you can freely adjust the Angle according to your needs. At the same time, you can adjust the diameter of the lift pipe, making your shower more convenient..
  • ✅ BEST REPLACEMENT: The shower head holder made of Engineering Grade ABS material, chrome plated, well constructed, durable and long lasting, the nature resin pad in the fitting increasing friction and prevent slipping up and down of the shower head holder..
  • ✅EASY TO INSTALL: No tool needed, this shower head holder can be easy to replace by adjust the fitting to screw into the slide bar and tighten, it means you don't need to take the slide bar apart and off the wall, save your workload and times..
  • ✅ 100% MONEY BACK GUARANTEE: If you are not satisfied with our product and have any problem with the product (eg: damaged/defective), please feel free to contact us and we will provide returns, exchanges and refunds for free..
Check Stock

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

  • 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
  • Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

  • 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
  • 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
  • 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
  • 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
  • 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock