Reviews Bar Clamps

IRWIN QUICK-GRIP Woodworking Clamps Set, 8-Piece (IRHT83220)

  • Mini Bar clamps exert up to 150 psi. of clamping pressure.
  • Handi-Clamps feature QUICK-RELEASE triggers for fast and easy positioning.
  • All clamps constructed of high-tech reinforced resin for strength and durability.
Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don’T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Hal....
Check Stock

JORGENSEN 8036 Cabinet Master 36 Inch 90 Degree Parallel Steel Bar Clamp

  • These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today.
  • This product is easy to use easy to install and highly durable.
  • Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar.
  • Clamping faces are 3-3/4 inch height and 1-7/8 inch width.
  • Ideal for do-it-your-selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
  • Pony Tools Inc. (founded 1903) is the manufacturer of the bar clamps and they are made with U.S. and foreign parts in our Chicago factory.
Check Stock

WORKPRO 8-Piece Clamp Set for Woodworking, 4-pack 4-1/2' Mini Bar Clamps and 4 Spring Clamps, Light-Duty Quick-Change Clamp/Spreader with 50 lbs Load Limit

  • F-Clamps&Spring Clamp Set: Comes with 4 pieces 4-1/2" bar clamps, 2 pieces 6-1/2" spring clamps and 2 pieces 4-1/2" spring clamps.
  • Clamp & Spreader: The unique screw-release button design allows the f-clamp to be a spreader as well. Just screw off the jaw and then reverse it before putting it back in, you will get the spreader you need.
  • Powerful Clamping Force: With up to 50 lbs of squeezing force and a metal ratcheting mechanism, WORKPRO bar clamp offers a decent choice for woodworking or other household repairs. It is lightweight, yet sturdy, and is capable of holding pressure for extended periods.
  • Solid Construction: Reinforced nylon body and high-quality hardened steel bars provide great impact resistance, which is totally able to withstand the heavy use expected on construction sites.
  • Ergonomic handle: The anti-slip handle can reduce hand fatigue and make clamping easier. Effectively hold any type of surface in your projects.
Check Stock

LISHINE 4 Inch Bar Clamps for Woodworking 8 Pack Quick Grip Clamps Trigger Clamp One Handed Ratchet Clamp Mini Small Bar Clamp for Craft

  • 【4 Inch Bar Clamp】Wood clamps woodworking sets capacity up to 4 inch. Throat depth: 1.25inch..
  • 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works,....
  • 【Clamp And Spreader】4 inch quick grip clamps is used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or....
  • 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar....
  • 【Durable And Sturdy】Quick clamps for woodworking is made of nylon body and high-quality hardened steel that provide great impact resistance..
Check Stock

DMoose Barbell Clips - Quick Release Barbell Collar - Non Slip Locking Weight Clips - Barbell Clamps for Weightlifting, Powerlifting - Weight Clamps for Standard Barbell (Black - 1 Inch Pair)

  • ...LACE - The DMoose weight collars provide you the utmost weight lifting safety by securing the weights tightly onto the bars. The durable material of barbell clamp is anti-slide, and the rubber pads maximize stability..
  • PERFECT FOR BODYBUILDING AND POWERLIFTING - The weight clamps are available in two different size options: 2” for Olympic weight lifting and 1" for standard bodybuilding and bar lifts. DMoose barbell collars provide additional safety for workouts and are an absolute necessity..
  • PUT ON AND TAKE OFF EASILY - The expertly designed collar for weight bar allows you to put them on the bars and easily take them off. This ensures time efficiency, so you can quickly switch bars during sets. It has a quick-release locking mechanism that allows it to be opened and closed easily..
  • NO RATTLING OF WEIGHT PLATES - The amazing thing about weight locks barbell is that they prevent the annoying rattling weight plates and help you work out without any interruptions by keeping weights locked in place. The olympic weight clips for bars will snugly fit onto the bar to avoid any accidents that might occur..
Check Stock

Jorgensen 2-pack Medium Duty Steel Bar Clamp Set with 600 lbs Load limit, 24-inch

  • Reach: 2-1/2’’ from edge of bar to center-line of screw.
  • Bar: 1/4”x3/4” plated, round-edge, high-carbon steel.
  • Screw: 3/8’’ diameter cold-drawn steel with special, smoothly cut U.S.S. threads.
  • Swivel: 3/4’’ diameter, plated steel, ball-and socket type.
  • Sliding-Head Design - The sliding head is threaded to accommodate the screw. All adjustments are made in the moveable sliding head, making this style fast-acting, easy to open and close and suitable for “close quarters” clamping. Strong, light-weight steel bars are rust-resistant. Multiple-Disc-Clutch holds securely at any point along the bar.
  • Materials - Our clamps are proudly made using high quality materials for lasting value and great performance. Strong, lightweight steel bars are rust-resistant.
  • Feature - Rust resistant zinc plated steel bar.
  • Sliding head with multiple disc-clutch holds work securely.
  • New comfort grip handle with fast moving screw.
  • Application Occasion - Suitable for a wide range of woodworking. Steel bar clamps are used by professional cabinet makers, carpenters, woodworkers, metalworkers, and with confidence by DIY homeowners on weekend projects.
Check Stock

36” Sure Foot Bar Clamps – Lightweight, Aluminum Carpenter Clamps for Woodworking - Pipe Clamps w/ 2-1/2' Foot Wide Base – Best Wood Clamps to Lock onto 3/4” Boards

  • Woodworking Clamps: Get all the great features of the aluminum Sure Foot pipe clamps for woodworking in a size that matches your project!.
  • Lightweight & Sturdy Design: These aluminum bar clamps for woodworking are lightweight, but stable and dependable, featuring the award-winning ergonomic Sure-Foot design..
  • Applications: These heavy duty clamps are used in a wide range of woodworking & DIY projects. Great tools for carpenters, woodworkers, hobbyists, cabinet makers, and professionals..
  • Easy To Use: Our Rockler clamps are easy to use and can clamp a wide range of projects, like building cutting boards of various sizes..
  • Available Sizes: These Rockler-exclusive design wood working clamps are perfect for any project, and are available in 24", 36", 48", and 60" lengths..
Check Stock

Rockler HD Pipe Clamp Rack – Rack Helps to Store Heavy Duty Clamps – 12 Gauge Galvanized Steel Pipe Clamps – Store Full Rack of Clamps up to 60” Long - Garage Workshop Organizers & Storage

  • Rockler HD Clamp Rack: The customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Easily store up to 60” heavy clamps at eye level and organized into two neat rows with our HD clamp rack..
  • Perfect For Storage: Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler HD pipe brackets clamp rack, you can say goodbye to untangling clamps! This quick clamps garage tool rack features stepped slots that accept both pipe clamps and parallel clamps..
  • Secure Hold: These racks are heavy-duty and hold woodworking pipe clamps securely. The clamps will not fall off even if bumped. The installation of these rack tool holders for your garage wall are pretty easy, it just requires lag bolts..
  • High Quality: This large pipe clamp storage rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space..
Check Stock