Reviews Bandpass Filters

Triplett 3399 Cable Tracer Fox and Hound Wire Tracing Kit w/ Case - WE Export

  • Adjustable sensitivity and loudness control Bandpass Filter suppresses 60Hz and high frequency noise.
  • Identifies Fox 2’s tracer tone up to 12 inches away Headlights illuminate dark areas and reduce fluorescent light noise.
  • Built-in signal strength indicator Earphone jack for use in quiet or noisy environments.
  • Easy access battery door Rugged, moisture resistant. Mylar cone speaker.
Check Stock

CXS64 V.2 - Image Dynamics 6.5" 4-Ohm Component Speaker System

  • 12" Dual 2-Ohm Voice Coil IDMAX Series Subwoofer.
  • 1000 Watts RMS /1800 Watts Max RMS Power Handling.
  • Mounting Depth 8.15" / Cutout Diameter 11.02".
  • 85.20 dB Sensitivity / 27.77Hz Resonant Frequency.
  • Works well in a sealed enclosure with a volume as low as .65 cu ft., but can also be used in ported and single reflex bandpass enclosures. Full specifications provided with subwoofer, and manufacturer's assistance is available by phone to help with enclosure design.
Check Stock

MidOpt Blue Bandpass Filter for Machine Vision, BP Series, Broad Bandwidth, BP470-30.5, Fits M30.5 Lens Filter Thread

  • Blue bandpass filter | BP Series | StablEDGE design.
  • Bandwidth FWHM: 85nm | Useful Imaging Range: 425-495nm.
  • Designed for use with blue LED lighting (450nm, 465nm & 470nm).
Check Stock

Talany SMA Filters Module, 2440MHz Band Pass Filter FBP-2440s Low Interpolation Loss High Efficiency Aluminum Alloy for WiFi

  • Near-IR bandpass filter | BP Series | StablEDGE design.
  • Bandwidth FWHM: 160nm | Useful Imaging Range: 820-910nm.
  • Designed for use with near-IR LED lighting (840nm & 850nm) and outdoor applications.
Check Stock

Memphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier

  • 65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
  • Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
  • Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
  • Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.
Check Stock

IDMAX15 V.4 D4 - Image Dynamics 15" Dual 4-Ohm IDMAX V.4 Series Subwoofer

  • 12" Dual 2-Ohm Voice Coil IDMAX Series Subwoofer.
  • 1000 Watts RMS /1800 Watts Max RMS Power Handling.
  • Mounting Depth 8.15" / Cutout Diameter 11.02".
  • 85.20 dB Sensitivity / 27.77Hz Resonant Frequency.
  • Works well in a sealed enclosure with a volume as low as .65 cu ft., but can also be used in ported and single reflex bandpass enclosures. Full specifications provided with subwoofer, and manufacturer's assistance is available by phone to help with enclosure design.
Check Stock

Mini Size Stable SMA Interface Anti-Interference Bandpass Filter 433MHz for Block Frequencies

  • 【STABLE AND RELIABLE】With high reliability, stable and reliable working performance.
  • 【FREQUENCY BAND】A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously..
  • 【BRAND AND NEW】This bandpass filter is 100% brand new and high quality.
  • 【LOW INSERTION LOSS】The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization..
  • 【CONVENIENT TO DEBUGGING】Convenient debugging, good selectivity and stability.
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

  • ...isplayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan point....
Check Stock

Pyle Bandpass Enclosure Car Subwoofer Speaker - 500 Watt High Power Car Audio Sound Component Speaker System w/ 10-inch Subwoofer 2 Aluminum Voice Coil 4 Ohm Ported Enclosure System - Pyle PLQB10

  • One 10'' High Power 4 Ohm Subwoofer - Plexiglass Front Window.
  • Blue Polypropylene Cone - 500 Watts Max Power Handling.
  • Specially Treated Black Rubber Edge Suspension - Frequency Response: 30Hz-700k Hz.
  • 2'' Aluminum Voice Coil - Dimensions: 12''H x 12''W x 17''D.
Check Stock