Reviews Ball Valve Class 150

Sulythw Adjustable Trailer Hitch Ball Mount, 10 Inch Drop Heavy Duty Tow Hitch for 2 Inch Hitch Receiver, Towing Hitches with 3 Trailer Hitch Ball (1-7/8, 2 and 2-5/16 inch) and Double Pin Key Locks

  • The Trailer hitch ball mount high 3-1/4 inch, which is higher than other. It can improve the breaking strength effectively. Protect your safety and Trailer.
  • Adjustable Hitch: This trailer hitch features a double ball head design, flipped to provide up to a 10 inch drop or 8 inch rise..
  • Adjustable trailer hitch ball mount is made of a lightweight, aircraft-quality aluminum alloy. With gross trailer weight rating of 13,000lbs on the 2-5/16 inch ball and 8,500 lbs on the 2 inch ball, 2,000lbs on the 1-7/8 inch ball.
  • Anti-Theft Function: Weigh safe hitch is equipped with two pins and two sets of keys to prevent theft. Getting extra security after the hitch is attached to your vehicle. Every hitch pin features a black key cover that protects the keyhole from dust and dirt. And Keep towing ball not lost..
  • Drop hitch is compatible with all 2 inch hitch receiver. Sometimes known as Class III & Class IV hitches. Such as Quarter-Ton Half-Size Pickups, Half-Ton Full-Size Pickups, All 3/4-Ton & Full-Ton Trucks manufactured before 2008, All SUV's and Crossovers, fit Tacoma, Colorado, Ranger, Canyon, Frontier, F-150, Chery & Ram 1500, Tundra, Titan, etc.
Check Stock

CURT 14355 Class 4 Trailer Hitch, 2-Inch Receiver, Fits Select Ford F-150, F-250, F-350, F-450 Super Duty

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford F150, F150 Heritage, F250, F250 Super Duty, F350 Super Duty and F450 Super Duty.
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

NAVAC N2D4H Manifold Gauge, Digital Display, 22 Refrigerants, 5' Hoses

  • Precision pressure gauge with Class 0.4 accuracy. Over 100% improvement vs. analog gauges..
  • Aluminum body with 1/4 turn ball valve handle.
  • Impact-resistant design with durable rubber cover.
Check Stock

CNCEST Plant Oil Extraction Tube Oil Extractor Stainless Steel Blast Extractor for Natural Plant Oil Extract 24

  • Sufficient capacity: 90 g capacity, small reminder, the volume after compressing the material..
  • Upgrade configuration: This product has upgraded the valve, using food-grade stainless steel ball valve, which is more robust and pressure resistant.....
  • Additional accessories: We provide additional 2*150 micron filter, 3* gasket, 1* sealing tape, 1* silicone pad for this vacuum chamber kit. I don't....
  • Material: 304 food grade stainless steel, easy to clean and easy to make, and will never pollute the raw materials..
  • Warranty policy: 1 year warranty, excluding gaskets, filters and other accessories. Believe me, no matter what product problems arise, we will try our....
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

  • 【Product Features】3/4 inch IPS isolation tankless water heater service valve kit includes hot and cold isolation valves(600 WOG) and pressure relief valve (150 psi/200K BTU). Colored valve handles for easy identification and use of hot and cold valves. Integrated drain valve with brass safety cap providing easy maintenance. Full port ball valve for better flow rate..
  • 【Widely Use】: The 3/4 inch size tankless kit is suitable for most American residential use, including domestic and commercial tankless gas water heater brands such as Rheem,Rinai, Ecosmart,Navien,Noritz,Takagi,Bosch and so on..
  • 【LEAD FREE Certification】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
  • 【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
  • 【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a r....
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock