Reviews Balanced Output

iFi ZEN CAN Balanced Desktop Headphone Amp and Preamp with 4.4mm Outputs [US Pin]

  • ...ed with our signature analog signal processing to deliver accurate and more natural bass frequencies through XBass, and to present a wider soundstage that brings the music out in front of you through our 3D matrix which replicates speaker listening without the cumbersome setup.
  • ✅ THE INS AND OUTS - Features both a balanced 4.4mm pentacon and a single ended 6.3mm (1/4”) headphone output on the front as well as three inputs on the back, including a 3.5mm line out, RCA left and right sockets, and a 4.4mm balanced pentacon connector. Additionally there is a 4.4 balanced output to connect to a power amplifier or active speakers for use as a preamplifier.
  • ✅ INCLUDED - RCA Cables, Standard 5v Power Supply and 3.5mm to 6.3mm adaptor..
Check Stock

PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth Connectivity

  • Stereo Bluetooth input lets you add wireless connectivity to any speaker..
  • Left/Right Balanced ¼” and stereo ⅛” TRS inputs make it easy to connect both pro and consumer audio gear..
  • Bluetooth on/off button lets you toggle between Bluetooth and analog sources and an easy-to-use pairing button lets you quickly pair your favorite....
  • Full-range Left/Right Balanced ¼” TRS to connect professional studio and media reference monitors..
  • Stereo ⅛” TRS headphone/aux output lets you connect your favorite headphones or output to a consumer device for streaming, recording, and more..
Check Stock

ART Tube MP Professional Mic Preamp/Processor

  • 12AX7 tube-based mic preamp for quality sound.
  • 70dB of gain while maintaining a low noise floor suitable for digital.
  • 1/4" TRS and XLR balanced outputs, input and output level controls.
Check Stock

XTUGA RX120 USB 12-Channel Professional Audio Mixer Sound Card Built-in 24-bit DSP Digital Effect with Recordable Function and Digital Display MP3,Bluetooth,EQ,Effects (black)

  • Ultra Low Noise 12-Channel Multipurpose Audio Mixer.Equipped with gilded XLRs and balanced Line input interface,with insert points.Balanced XLR (Canon) input, can connect a standard Canon male connector,With +48V Phantom Power Supply..
  • Single main channel mixed output and recording output,Has two grouped channels.Use the Route Switch button to select the main output or group output you want.All mono channels have a peak LED indicator. Adjust the GAIN knob until the indicator light is dim or slightly lit.Achieve ultra low distortion..
  • Built-in multilevel digital effects.Give you 24-bit DSP digital effects.Select a suitable reverb effect by rotating,such as delays, chorus and reverb, etc.Professional 48V phantom power is available for all types of condenser microphones. Power supply: AC~90V-240V..
Check Stock

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer+3 Way Mono Crossover

  • .... Dual channel (31 bands per channel). Variable stage low and high cut filters. 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range.
  • Output level LEDs (-10 to +17 dB). Bypass switch with status LED. Ground lift switch. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel. Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, 20 kHz.
  • Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dB. Level Control: +/- 10 dB. Signal to Noise: >93 dB. Distortion: 0.005%. Roll-off filters: 18dB/octave, Butterworth. Power Consumption: 15 watts. Weight Unpacked: 7.00 lbs. Weight Packed: 9 lbs. Width Packed: 5.87". Height Packed: 20. 5". Depth Packed: 9.62". Features of RX230: RockvilIe RX230 2-way Stereo / 3-way Mono rack mountable crossover.
  • Ability to mix 2 channels output. 24dB/Octave filters. Mute switches. Channel Gain ....
Check Stock

Topping D90SE MQA DAC ES9038PRO DSD1024 PCM32bit/768kHz DAC Balanced Decoder USB/Coax/Opt/AES/IIS Desktop Bluetooth5.0 Audio DAC (Black)

  • ▶MQA DAC: D90se is a new D90 decoder with better performance and wider support for MQA. OPT, COAX, USB and AES can support MQA rendering and decoding..
  • ▶Bluetooth 5.0 LDAC transmission: D90SE has the certification of hi-res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it's digital signal to ES9038PRO to decode..
  • ▶Selectable output: D90SE has balanced XLR output and single ended RCA output. You can choose " XLR only" "RCA only" or "XLR + RCA " output to for different applications..
  • ▶Plug and play: D90SE has a wide range of compatibility, Windows 10, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications,you need to install the driver and set it up..
  • ▶A90 will be the best headphone amplifier for D90SE: Full balanced NFCA module, 0.2uV ultra low noise. 0.00006% ultra low THD + N0.1 ohm output impedance, wide gain setting high output voltage, almost suitable for driving all kinds of headphones..
Check Stock

FiiO K7 Full Balanced HiFi DAC Headphone Amplifier AK4493S*2, XMOS XU208 PCM384kHz DSD256,USB/Optical/Coaxial/RCA Inputs, 6.35mm/4.4mm Output(US Plug)

  • The most competitive and cost-effective desktop balanced DAC/Amp within the 300-USD range.
  • Adopts the six-stage audio circuit as in FiiO’s high-end devices, and features 2 AMK’s latest AK4493SEQ DACs and dual THX AAA 788+ amps.
  • Supports multiple outputs- 4.4mm balanced out, 6.35/3.5mm single-ended out, as well as multiple inputs- USB, optical, coaxial and AUX in.
  • Comes with versatile functions as well as robust output power- 1% THD+N under BAL output, 2000mW stable output power, which can drive most headphones, including full-size headphones.
  • Supports input selections, 2 gain levels and 3 output levels, and features RGB indicator lights that can display the working state and differentiate sampling rates..
Check Stock

Monolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs

  • Solid State Amplifier : Balanced design. Ultra high power. The Liquid Gold X is a fully differential, balanced, current feedback, solid state amplifier with an approximate full output power of 3.6 watts per channel into a 50-ohm load. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
  • AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
  • Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
  • Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
Check Stock

Preamplifier

  • ►TOPPING Pre90 Preamplifier: Fully balanced amplifier structure for both balanced and single-ended signals. Pre90 could set volume memory for each input or volume memory for each output. More easy operation with the remote controller..
  • ► Selectable XLR / RCA output: The output of Pre90 could be config to “XLR only”, "RCA only" or "XLR + RCA ". Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90..
  • ►Ultra-high Performance NFCA modules: It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background..
  • ►Ext90 could extend you more inputs: A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems..
  • ►Relay volume control: A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your ....
Check Stock