Reviews Axial Shaft

Climax Metal C-012-A Set Screw Collar, Aluminum, 1/8\ Bore Size, 3/8\ OD, With 6-32 x 1/8 Set Screw

Setscrew shaft collar for applications supporting low axial loads and simple positioning.
Effective on shafts made of softer material than the setscrew material.
Aluminum for resisting corrosion and tarnishing.
Includes a socket setscrew for securing the collar onto the shaft.
Operating temperatures range from -40 to 104 degrees C (-40 to 220 degrees F).

【Fit 3/4″ Shaft Horizontal Pumps】Fit Most 3/4″ Shaft Horizontal Crank Pressure Washer Engines, brands including Honda GCV , Generac, Briggs.
【Pressure Washer Pump】Direct drive horizontal axial pump fits most horizontal 3/4″ shaft power washer: Could work at wide range from 2900 to 3200 PSI, best performance at 3000PSI and 2.4GPM. Good replacment for horizontal pressure washer pumps..
【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine..
【Easy to Install】When installing, please ensure that the keyway is installed before running your pressure washer..
【Sale and After-Sale Service】The provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, we would like to service you..

Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
Manufactured to meet or exceed OE specifications.

Suitable for: Axial scx10 portal axles front rear axle fit for 1/10 Axial SCX10 RC Crawler Car Model. SCX10 crawler car built for extreme off-road capability that takes you to new places and new adventures. Compatible with：The front and rear axles of this remote control car are suitable for SCX10 1/10 RC crawler car model, which can be substituted..
High-quality upgrade accessories: 1/10 axles high pinion gears for added ground clearance and better driveshaft angles. Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain..
Aluminum alloy material: scx10 axles aluminum alloy shell CNC, internal steel gear and drive shaft, excellent properties, high reliability. Alloy Front and Rear Axle Assembly Parts Lightweight, beautiful shape, durable. Directly replace Original plastic axles, Made your car more attractive and cooler. With increased height and width, it is more passable than ordinary axles and higher from the ground..
Axial scx10 axles the front and rear 1/10 crawler axles of the remote control car better eliminate the wave system, and there is a large gap under the axis, which greatly improves the off-road climbing performance. Improve the stability of the body and the overall performance of the remote co....

1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation..
2.Max Working Pressure: 10bar(145PSI).Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉.
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on..
4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water..
5.Materials: Pump housing: Stainless Steel.
Impeller: Corrosion-resistant, Composite, PES.
Bearing: Carbon axial. › See more product details.

Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 10mm, Bottom Shaft Diameter: 10mm,....
Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..

Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 6mm, Bottom Shaft Diameter: 8mm, Mounting....
Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..

Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.

Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
Manufactured to meet or exceed OE specifications.