Reviews Automotive Electronic

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

... Positive/Negative Test, Setting, Online Update.【Test Applications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the automotive probe tester, which can g....

【Suitable For】Replacement For boost control solenoids offered by for Turbosmart, for Cobb Tuning, for AEM, for Autronic, for Haltech, for Grimmspeed and many others..
【Widely Applicable】The 35A-AAA-DDBA-1BA aluminum alloy three-barrel solenoid valve is Suitable For most turbocharging and supercharging applications and is compatible with most after-sales ECU programs..
【Adjustable Parameters】The automotive electronic boost control solenoid valve is driven by width modulation (PWM), which can stably and reliably lift the target..
【25.4 Ohm】The power of the electronic boost control solenoid valve is 5.4W, using a 25.4ohm coil, the vacuum can reach 120 PSI, voltage is DC 12V..
【Replaceability】It can be used to replace most of the boost control electromagnets, and has strong practicality. 3 port solenoid, this is the most common method for controlling boost..

High Quality Material: Plastic, sprial interior dynamic mixing nozzle..
Mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants. Applications include electronic component potting, automotive, communications, automotive, aerospace, biodiesel, wind and solar energy devices and many others..
Efficiently mixes a variety of 2 Part adhesives, sealers and foams..
High-Performance mixing nozzle for use with all standard 50ml B-System cartridges, Hinkle polyurethane, compatible with all major adhesive brands.

Use for electronic components where shock absorbing qualities are crucial..
Use for automotive/Motor sports applications where weight reduction and strength are required..
Use for aerospace, defense and satellite applications where weight reduction is critical..
Use as parts of mechanical vibration shakers for test fixtures..
Use for communication equipments which requires high EMI shielding performance..

Nominal Size: 1/4" | Length: 25 Feet | Color: White.
Operating temperature: -103 F to 257 F | Melt temperature: 446 F.
Made from Polyethylene Terephthalate | Good Flexibility.
Cut to length (Hot knife recommended) | Great for automotive, computer and electronic applications.

... fine to use outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..

1500 W Heat Gun with variable temperature between 120°F - 1100°F, 3 Stage Air Contro and Duratherm heating element.
Thermocouple control for precise temperature regulation.
The Heating Tool is well suited for plastic welding, packaging, automotive, maintenance.
Double insulated Power Tool with an ergonomically designed shape and a 6 ft long Power-Cord.
Reduction nozzles are approved for use on Professional Heat Guns with electronic thermocouple control.