Reviews Automobile Part Mold

Silicone Molds for Concrete Flower Pots, Mini Concrete Silicone Mold for Plants, Square and Round Shape，2 Pack

【Mold Combination】This mold is composed of two parts, a part is a plastic Frame, and its sturdy outer shell supports the concrete weight without the shape change. The other part is Silicone resin that can make the mold surface smooth, and easy to demold, clean, and re-use..
【Silicone Planter Molds】smooth surface, easy to demold, clean, and re-use. the mold is made of flexible silicone, resistant to tearing, longer lifespan than general silicone molds, and is not easy to deform..
【For What】Silicone Planter Molds can be used for the plaster to make succulent planters and candle containers..
【DIY Helper】Can be used with concrete, cement, clay, plaster, or epoxy resin to make succulent planters and containers, and you could put any colors in it just you want..
【Finished planter size】3.15 x 3.15 x 2.75 inches (about 8.9 x 8.9 x 6.9 cm) for square and round size..

Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.

INSTANT MOLDS IN JUST 10 MINUTES: Alumilite Mold Putty is the ultimate time-saver, as it allows you to cure your molds in just 10 minutes. A perfect....
MAKE MOLDS TO YOUR TASTE: Can't find the perfect premade mold in the right size in stores? Why not make your own instead! With Alumilite's Mold Putty,....
WIDE RANGE OF APPLICATIONS: You can use this rubber mold-making kit for a variety of unique and fun craft projects. It's ideal for product modeling....
NON-TOXIC AND FDA-COMPLIANT: This mold making putty can be used to create molds for candies, butter, fondant, gelatin, ice or chocolates because it's....
EASY CRAFTING: Alumilite Mold Putty is a two-part silicone molding compound that's easy to mix and handle. Simply mix equal amounts of the purple and....

【Inch unit】: can read the value of inch unit directly without unit conversion..
【Precise measurement】: It adopts carbon steel for mechanical structure and chrome plating on the surface, which can ensure the accuracy and stability for long-term use..
【Laser scale】: Marking with a laser marking machine, the scale is clear and delicate, not easy to wear, long-term use, the scale is still clear and discernable..
【Application】: Applicable to the measurement of groove, gap and other dimensions. Widely used in construction, railway, electric power, ceramic sanitary ware, automobile windshield and mold gap and other gaps..

The package contains 2 stainless steel knob plungers..
Dimensions: 37.5x10.x6mm/1.47x0.4x 0.23in thread M6 Thread length: 12mm Pin outer diameter: 4mm.
Made of stainless steel, durable, corrosion resistant, rust resistant..
Light and portable, easy to carry, saving space..
Can be used in mold, cabinet, electrical appliances, industrial equipment, automobile and other fields..

【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1....
【SELF-DEGASSING & LOW VISCOSITY & EASY MIXING & POURING】this SIPOLYSUN 30A mold making silicone rubber has low viscosity so that you can easily....
【POT LIFE: 50 MINUTES, CURE TIME: 4~6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room....
【LARGE VOLUME: 1 GALLON = 10 Lbs】PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION: Sipolysun silicone rubber is a platinum grade additional RTV-2....
【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest....

The product is made of high wear-resisting bearing steel, which is suitable foThe product is made of high wear-resisting bearing steel, which is suitable for the gaps of 0.4-6mm (Measuring straight through gap).r the gaps of 0.4-6mm (Measuring straight through gap)..
Application: construction, railway, electric power, ceramic ware, automobile windshield and mold gaps and other gaps..
Simple structure, convenient measurement..
It can be read by placing the gap gage between the measured gaps..
The error is smaller and the measurement result is more accurate..

Mold Combination: the concrete molds for pots consist of 2 parts, one is a plastic frame with a strong shell that supports the weight of the concrete without changing its shape.
The other part is a silicone resin that allows the mold to have a smooth surface for easy release, cleaning and reuse.
Practical Combination: the package comes 3 pack, round and square concrete cement mold and oval flower pot silicone mold, and comes with many base coasters, convenient and practical.
Suitable Size: round and square silicone pot mold size is about 7.5 x 3.5 x 2.8 inches, oval flower pot mold size is about 5.2 x 3.7 x 3 inches.
Small and easy to pack, also suitable for children's DIY class.
DIY Helper: you can match concrete, cement, clay, plaster in to silicone pot mold to make succulent flower pots and containers, you can put in any color at will to make juicy flower pots, candle containers, pen holders.
Silicone Flower Pot Mold: smooth surface, easy to demould, reliable and reusable.
The flower pot mold is made of silicone, longer life than the general silicone mold, not easy to defor....

...reating projects can help prolong the life of your molds by preventing sticking..
Easy to Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. After drying, the mold release allows for easy removal of the finished part from the mold..